cat,
I use 3M 77 spray for laminating paper and light card on to heavier material. For thick material like illustration board I don't trust its long-term holding strength. For small laminations I use the large disappearing purple Avery Glue Stick. JoeG -----Original Message----- From: cat <[email protected]> To: [email protected] Sent: Thu, Aug 6, 2009 3:27 pm Subject: [Papermodels II 39133] Re: START U-Boat Type VII-C 1:32 James Hairston wrote: > If you use foam-core laminate both sides and lay it on a flat surface > with a board on top until dry to prevent warping. Or use a low tack spray adhesive. All the warpage I have ever experienced were the fault of the adhesive not the process. After realizing the paper/card was not at fault I tried a number of adhesives and found the low tack ones often found at art or drafting shops worked fine and the warping stopped. cat --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
