Thanks for all the input so far. Unfortunatly, as Ron pointed out; I don't have FWB Tools, only what comes with OS 9. Both drives are not apple branded however, the second Quantum was a back drive in my 8600/300 (ATA/100 PCI IDE Card). And when I put the drive back into the 8600 it's immediately recognized. Not only that. But the old Apple branded 1gig I had in my G3 is no longer recognized..
On 5/30/04 5:27 PM, "J.S. Garrison" <[EMAIL PROTECTED]> wrote: > on 5/30/04 12:33 AM, nathan at [EMAIL PROTECTED] wrote: > >> Listers, >> >> After following this thread for a bit. I'm also having a problem with 2 >> Quantum Fireballs. One 6.4 gig XL (IDE) the other a 6 gig EL (IDE) Which I'm >> trying to get into my G3/300 running 9.2.2 . I configured both drives for >> master/slave and plugged them in correctly. When I boot my computer, >> everything comes up, except the additional drive. Nothing on the desktop... >> Any suggestions? Do I need to reset the PRAM on boot to see this new drive? >> >> TIA, >> -nathan > > > Some G3's, specifically Revision Ones, have an issue handling two IDE > drives. Your second drive may well need to be a SCSI. > > > Jeff > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
