Hmmm. I also have two flashes, an AF500FTZ and a Metz 45CT4
(with module and converter for full TTL). I'll have to see what
happens.
What shutter speed does your PZ-1p select? There's a Pentax
Function that tells the camera to either meter for ambient light
or set shutter speed at 1/250th. I suspect that yours is set up
to meter for ambient and chooses 1/30th at f/2 in low light.
I'll try to set up the same conditions with my stuff. I also
have a 43mm f/1.9 Ltd.
Len
---
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Chan
> Sent: Saturday, February 24, 2001 8:36 PM
> To: [EMAIL PROTECTED]
> Subject: Z-1p TTL flash question
>
>
> I have never used TTL flash in program mode much so I
> have never paid much
> attention to this feature. Until yesterday, I have
> discovered the auto
> aperture would be set quite differently by two
> different flashes - Metz
> 40MZ3i and Pentax AF200T. With the 40MZ3i, the chosen
> aperture was f2 while
> the AF200T chose f8. The lens was 43/1.9. Any idea why?
>
> regards,
> Alan Chan
>
> ______________________________________________________
> ___________________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
>
> -
> This message is from the Pentax-Discuss Mail List.
> To unsubscribe,
> go to http://www.pdml.net and follow the directions.
> Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org .
>
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .