I have hung onto the working card so far, but I am a little concerned
about the prospect of metal filings in the case.
On 7/27/2015 2:05 PM, mike wilson wrote:
Card 2 and some file work (or a Dremel if you are feeling idle) would
seem to be the answer.
On 27 July 2015 at 16:50, Mark C <pdml-m...@charter.net> wrote:
Here's why I don't like messing with my PC. Trying to add a USB 3.0 card:
Card #1 - Inateck with Fresco Chipset. Does not work - not detected by
Windows. Returned.
Card #2 - Tenex with NEC chipset. Seems to work fine! Detected by Windows,
driver is installed, Windows notifies me of the devices that could perform
faster... but is physically incompatible with my case (see the picture)
http://www.markcassino.com/b2evolution/media/blogs/PDML/20150723_100156.jpg
Card #3 - TomTop card with same chipset as the card above but with the
ports oriented in the other direction. Does not work when SATA power is
connected - not detected by Windows. *Is* detected by Windows when power is
NOT connected but devices do not work when plugged in. Probably needs power!
I'm requesting a replacement and if that does not work... to hell with it!
Grrrrr.....
Mark
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and
follow the directions.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
