Check your local computer geek shop. They should have an over-priced
SATA to Molex connector.
On 7/27/2015 3:19 PM, Mark C wrote:
Thanks, Igor. I looked at your recommendation but it has a molex power
socket and I only have sata power plugs free in the case - I don't even
see any molex cables in there at all. I picked the first card because of
the sata power port, Inateck's good reputation, and also because it
included a sata power cord extension (which I found was not necessary.)
After that I just looked for NEC chipset and sata power socket, and
eventually also for ports in the needed orientation - those three
factors combined really limit available choices Maybe I'll try the
transcend card and get a sata to molex adapter (I was trying to keep
things simple but obviously have not been successful on that front.)
On 7/27/2015 1:46 PM, Igor PDML-StR wrote:
Hi Mark,
Sorry to hear about your troubles.
But why did you go for the more obscure cards and chipsets?
I remember that I researched when I was buying, and Transcend card
that I suggested had a good compatibility record, and worked for me
even on WinXP:
http://www.bhphotovideo.com/c/product/696114-REG/Transcend_TS_PDU3_2_Port_USB_3_
0_PCI.html
As far as I remember it has NEC/Renesas chipset.
(Although I see now somebody's comment complaining about drivers for
64-bit Windows, if you install correct drivers, it works just fine:
http://www.amazon.com/review/R346MKTNSV3FJM/ref=cm_cr_rev_detmd_pl?ie=UTF8&asin=B003MVJG8Q&cdForum=Fx190IO4NYDDUE&cdMsgID=Mx13H5WCW689GCR&cdMsgNo=3&cdPage=1&cdSort=oldest&cdThread=Tx73HNRBBX5BRR&store=electronics#Mx13H5WCW689GCR
)
Good luck!
Igor
Mark C Mon, 27 Jul 2015 08:51:57 -0700 wrote:
Here's why I don't like messing with my PC. Trying to add a USB 3.0 card:
Card #1 - Inateck with Fresco Chipset. Does not work - not detected by
Windows. Returned.
Card #2 - Tenex with NEC chipset. Seems to work fine! Detected by
Windows, driver is installed, Windows notifies me of the devices that
could perform faster... but is physically incompatible with my case
(see the picture)
http://www.markcassino.com/b2evolution/media/blogs/PDML/20150723_100156.jpg
Card #3 - TomTop card with same chipset as the card above but with the
ports oriented in the other direction. Does not work when SATA power
is connected - not detected by Windows. *Is* detected by Windows when
power is NOT connected but devices do not work when plugged in.
Probably needs power! I'm requesting a replacement and if that does
not work... to hell with it!
Grrrrr.....
Mark
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
--
Science - Questions we may never find answers for.
Religion - Answers we must never question.
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
