William- Thanks, hope to hear back from you. I'm going to send the Drive back to KEH today and see if I can get another one in the meantime.
Taka -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of William Robb Sent: Wednesday, May 29, 2002 8:59 PM To: [EMAIL PROTECTED] Subject: Re: Motor Drive problems Taka, I will check with my repair guy on this one. Don't discount the possibility of an oxidized electrical connection causing the motor to torque out under load though. Give me 18 hours to find what he says. William Robb ----- Original Message ----- From: TM <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, May 29, 2002 5:26 PM Subject: RE: Motor Drive problems > Wouldn't poor contacts cause the motor drive to stop working > completely at times? > > I'm not able to run a single roll through the camera w/o the motor > drive acting funny, but it seems as though when it works, it works > fine and this problem never showed up when testing the motor drive > w/o actually winding film (empty camera). > > Any other suggestions? I'm going to send this one back to KEH and see > if I can get another one in the meantime- I want two drives as I have > two Super As. - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
