Brad Velander wrote: >Dennis, Bob, > Typically I will have my PCB on the left monitor and a schematic page > on the right monitor for most of my work and this works pretty well because > at that time I am not doing a lot of schematic edits (on the right monitor). > When I am working on only schematics I will commonly have two schematic > pages, visible and split equally between the two monitors. While editing > schematics in this manner, working on the right schematic/monitor, the bug > involving the split between monitors moving rears it's head randomly. > > If I am editing the schematic on the right monitor and I just click > somewhere along roughly a vertical line approx. 75% across the right monitor, > the split between the two schematics will jump to approx. that point. Making > the left schematic page cover 1.5 - 1.75 percent of the total work area. It > is somewhat random or possibly it is just a very precise thin target line > that you don't click on it very often (just a simple click, no operation > specified at the time, typically I am making sure the focus is on that > schematic on the right monitor and not the schematic on the left monitor). > > I don't know how better to put it into words, the vertical line is not > an actual line/wire in the schematic though, it is just some arbitrary > vertical axis in the work area of the right monitor. This is very consistent > across our three PCB designer's work stations, so it is not just me or my > computer/install. They are all different machines, with different video > cards, monitors, CPUs, etc., so it is also not a computer/driver/config issue. > >Sincerely, >Brad Velander >Senior PCB Designer >Northern Airborne Technology >#14 - 1925 Kirschner Road, >Kelowna, BC, V1Y 4N7. >tel (250) 763-2232 ext. 225 >fax (250) 762-3374 > > > > >-----Original Message----- >From: Dennis Saputelli [mailto:[EMAIL PROTECTED] >Sent: Wednesday, June 21, 2006 8:37 PM >To: Protel EDA Discussion List >Subject: Re: [PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens > > >this sounds about consistent with what brad & i have said > >brad, i didn't notice it (sch issue) as closely as you did but putting >the sch on one monitor solved the issue, too bad > >AD6 doesn't do this and am also playing with manual routing, it seems >pretty good and smart at that but i am nowhere up to speed on the program > >ds > > >____________________________________________________________ >You are subscribed to the PEDA discussion forum > >To Post messages: >mailto:[email protected] > >Unsubscribe and Other Options: >http://techservinc.com/mailman/listinfo/peda_techservinc.com > >Browse or Search Old Archives (2001-2004): >http://www.mail-archive.com/[email protected] > >Browse or Search Current Archives (2004-Current): >http://www.mail-archive.com/[email protected] > > > > I also see the same effect as Brad.
Graham. ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
