Works. Only a small error that it recognizes VCC instead of VSS on Power Layer (few paths), but will correct it manually.
Thanks! Regards, JM Jon Elson napisał(a): > Jakub M. wrote: > > >> OK, so I have made one complete channel (PCB). Naming convention of >> parts in all channels is U100_A, C123_A for channel A, U100_B, C123_B >> for channel B and so on (18 of them). >> >> Now what should I do to make other channels to be similar to A one? >> >> I think that I should (more-less) copy A into some "dummy.pcb" then >> re-annotate all the parts from "..._A" to "..._B" (HOW?), delete old "B" >> parts from the original PCB and paste all from "dummy.pcb". Is that >> correct? How can I re-annotate easily all the parts? And if needed load >> the netlist. >> >> >> > The procedure is : > > 1. select the whole channel > > 2. copy to clipboard with ctrl/c > You need to specify the grab point on the selected area > > 3. you can do a paste special/paste array with the required spacing between > channels, and the number of channels to be pasted. > > 4. deselect all > > 5. select the 2nd channel > > 6. double click on any part, select global edit, and in the part > designator edit > field, put _A=_B and check selected parts and at the bottom select > all primitives. > > (repeat steps 4 - 6 for each channel.) > > I think you could have made things easier by making all your designators > C1001,C2001,C3001 in the first channel. Then when you do the paste array, > I think it will make the next channel have a C1002,C2002,C3002 if you select > the increment to 1. You could also make the increment 1000 and make C1 > change to C1001 on the next channel. > > Jon > > > > ____________________________________________________________ > You are subscribed to the PEDA discussion forum > > To Post messages: > mailto:[email protected] > > Unsubscribe and Other Options: > http://techservinc.com/mailman/listinfo/peda_techservinc.com > > Browse or Search Old Archives (2001-2004): > http://www.mail-archive.com/[email protected] > > Browse or Search Current Archives (2004-Current): > http://www.mail-archive.com/[email protected] > > > > ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
