Mark Rogers wrote:
However, I still would assume that the PXE boot would work over wireless using a wireless access point (ie AP configured and working separately, PC connected to the AP via ethernet, PC should be able to perform PXE boot through the AP). Ie if there were a requirement for a wireless PXE boot it could be achieved by putting at AP on the desk next to the PC.
perhaps a terminology issue here, I think you're describing a wireless client adaptor connected to the PC via wired ethernet. Or possibly a WDS AP with the PC plugged into that.
Most people envisage a base station when the term "access point" is used, I suspect, rather than a client device.
Phil _______________________________________________ Peterboro mailing list [email protected] https://mailman.lug.org.uk/mailman/listinfo/peterboro
