* Mark Homoky wrote :
>* Monday, May 23, 2011, 12:25:40 AM, you wrote:
>
>> I've recently been keeping an eye on my mail statistics
>> usingmailgraph http://mailgraph.schweikert.ch/ . I'm impressed by
>> the amount of spam/rejections achieved using just postgrey and some
>> postfix restrictions.
>
>> One thing that is puzzling me is the number of sent/received msgs.
>> eg today's stats have 108 msgs sent and 187 received. With the
>> number of mailing lists I'm on and the number of users on thisfamily
>> domain, that sounds about right for the received messages.
>
>> But there is no way 108 messages were sent. I don't think I
>> personally sent any other than this one. The other users on this
>> domain would not have sent that many, maybe 10 tops. It's the same
>> for weekly and monthly stats. The sent messages seems extremely
>> high.
>
>> Wondering if the "sent" for this application included the postfix
>> rejection messages? What other messages could be included?
>
>> Sorry if this is OT here, but figured many users here would be
>> familiar with it?
>
> Hi Troy,
>
> I run a similar setup at home too (in addition to work).
> Can I suggest you post your postconf -n to start with?
Here is a trimmed output of what (I think) will be relevant. If you
think I've trimmed too hard, please let me know.
body_checks = pcre:/etc/postfix/body_checks.pcre
broken_sasl_auth_clients = yes
content_filter = smtp-amavis:[127.0.0.1]:10024
delay_warning_time = 4h
disable_vrfy_command = yes
header_checks = pcre:/etc/postfix/header_checks.pcre
postscreen_dnsbl_sites = list.dnswl.org*-5
sender_bcc_maps = pcre:/etc/postfix/sender_bcc
smtpd_client_restrictions = permit_mynetworks,
reject_invalid_hostname, check_client_access
regexp:/etc/postfix/white_list check_client_access
regexp:/etc/postfix/rejections
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks, reject_invalid_hostname,
check_helo_access regexp:/etc/postfix/helo_restrictions
smtpd_recipient_restrictions = permit_sasl_authenticated,
permit_mynetworks, reject_unauth_destination,
permit_dnswl_client list.dnswl.org, reject_rbl_client
zen.spamhaus.org, reject_rbl_client bl.spamcop.net,
check_policy_service inet:127.0.0.1:10023
smtpd_sender_restrictions = permit_mynetworks,
reject_non_fqdn_sender, reject_unknown_sender_domain
> And if you've changed it at all your master.cf would help.
I've only amended master.cf for postgrey and amavisd-new:
pickup fifo n - - 60 1 pickup
-o content_filter=
-o receive_override_options=no_header_body_checks
smtp-amavis unix - - - - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
-o disable_dns_lookups=yes
-o max_use=20
127.0.0.1:10025 inet n - - - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_delay_reject=no
-o smtpd_client_restrictions=permit_mynetworks,reject
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o smtpd_data_restrictions=reject_unauth_pipelining
-o smtpd_end_of_data_restrictions=
-o mynetworks=127.0.0.0/8
-o smtpd_error_sleep_time=0
-o smtpd_soft_error_limit=1001
-o smtpd_hard_error_limit=1000
-o smtpd_client_connection_count_limit=0
-o smtpd_client_connection_rate_limit=0
-o
receive_override_options=no_header_body_checks,no_unknown_recipient_checks
> Be sure you're not setup as an open relay too, but let us read over
> your config here on the list to help you.
I'm pretty sure, and hopeful, that the above config prevents this.
> My first thought from the default install would be to switch off
> soft_bounce in main.cf with soft_bounce = no
I don't have soft_bounce set or called up at all, so would just be
the default for a ubuntu install. I'll check into what that is.
--
Troy Piggins