At Palo Verde, this is done by our RP ALARA/Planning group From: [email protected] [mailto:[email protected]] On Behalf Of THOMPSON, THEODORE W Sent: Friday, September 16, 2011 6:10 AM To: [email protected] Subject: Powernet: inefficiencies used for TEDE-ALARA
I would like to know what inefficiencies you assign when doing a TEDE-ALARA for the following types of respiratory equipment. 1. Full-face negative pressure 2. PAPRs 3. MaxAir PAPRs 4. SCBAs 5. Airline respirators 6. Hoods 7. Any other respiratory equipment you use Also, do you use any type of inefficiencies for other protective clothing? Last but not least, if you use Non-Niosh MaxAir Hoods (for preventing facial contamination) how do you handle them and who is responsible for them? Thanks for any information you can share. Ted Thompson Health Physicist Ft. Calhoun Nuclear Station Email: [email protected]<mailto:[email protected]> ________________________________ This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, nor acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
