Robinson requires Hoods specifically in all RWPs. From: [email protected] [mailto:[email protected]] On Behalf Of Trimble, Harold Sent: Thursday, October 04, 2012 7:41 AM To: [email protected] Subject: Powernet: RE: Use of PC Hoods
Required for all entries via RWP At Hope Creek We reduced facial PC's by > 50% on the fuel floor Workers complain they are too hot and the Velcro on some of them wears and comes undone requiring tap which then becomes a potential FME issue Hal trimble ________________________________ From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael C Wynn Sent: Thursday, October 04, 2012 6:43 AM To: [email protected]<mailto:[email protected]> Subject: Powernet: Use of PC Hoods Millstone is implementing during our refueling outage the requirement to wear (disposable Orex) PC hoods to meet our RWP full PC dress requirements for contaminated area work. I'd like to pulse the industry on the following: 1) How does your station incorporate the use of PC hoods? (e.g., RWP requirement, optional, etc..) 2) What has been the overall benefit of using PC hoods? (e.g., reduced PCE's, etc..) 3) What insights or challenges has your station experienced from the use of PC hoods? Thank you all in advance. Michael C. Wynn Supervisor Radiological Analysis Millstone Power Station Bldg. 437/2 Rope Ferry Road Waterford, CT 06370 Office: (860) 447-1791 Ext. 4815 Fax: (860) 444-4241 http://www.dom.com/ CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. ________________________________ The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation.
