1 method I use to help prevent the analyzing poly problem:
While designing the PCB, set the poly grid size to 50. Everything else,
keep it at what you want. Your last step before Gerber would be to set grid
size to what you initially wanted, when prompted, rebuild the polygon layer.
Other benefits if your poly's are like 90% of your design file size & its
over 20-40 megabytes: Working with the grid size at 50 also shrinks the PCB
file size, minimizes .swp access, speeds up PCB autobackups while you the
work, & lowers the risk of system crash, or PCB corruptions.
_____________
Brian Guralnick
[EMAIL PROTECTED]
----- Original Message -----
From: "Terry Creer" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Tuesday, July 29, 2003 10:45 PM
Subject: [PEDA] Analysing...
> I should have added, that it only happens when I edit anything on the GND
> net (the net with all the poly's).
>
> BTW, I'm using a P4 1.6 with 390Mb RAM Win 2k etc..etc..
>
> Thanks again,
>
>
> TC
>
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
