Are you issuing the arrow down and arrow up commands from the Edit window or at 
least while the edit window is open somewhere in the background. This makes a 
difference when entering start and end values. Perhaps it might affect 
capturing values with arrow keys. Apart from that, make sure you're set to have 
the insertion NOT following playback in the Preferences.

HTH,

Slau

On Apr 21, 2011, at 2:01 PM, Ronald van Rhijn wrote:

> Hey Frank,
> That was the first thing I checked and both are selected. Like I said 
> earlier, the shift key don't do anything either. I have the right audio track 
> selected in the tracks table and made sure by scrubbing there is an insertion 
> point on it.
> Can it perhaps something to do with the keyboard focus buttons? There are two 
> of them in the edit window and one in the mix window.
> Ronald
> 
> .Op 21 apr 2011, om 19:08 heeft Frank Carmickle het volgende geschreven:
> 
>> Hi Ronald
>> 
>> You need to make sure that you have link timeline and edit selection checked 
>> in the options menu.  It is also helpful to have link track and edit 
>> selection checked so that you can use the handy control p and control ; to 
>> select tracks to edit.
>> 
>> HTH
>> --FC
>> 
>> 
>> 
>> On Apr 21, 2011, at 1:01 PM, Ronald van Rhijn wrote:
>> 
>>> Hello,
>>> Can anyone shed some light on why the mark in and out commands with the up 
>>> and down arrowkeys aren't working for me? Are there some specific settings 
>>> for this to work?
>>> selecting parts in a track with the Shift key used to work, but cannot seem 
>>> to get that working either.
>>> Many thanks in advance.
>>> 
>>> Ronald
>> 
>> 
> 

Reply via email to