If insertion follows playback, you'll lose your selection if you engage the 
transport after having made a selection, that is, selecting a range.

Let me ask you this:
How do you know you don't have a selection after engaging the transport, 
pressing down arrow at a certain point and then pressing up arrow at a later 
point and then stopping the transport?

Slau

On Apr 21, 2011, at 3:20 PM, Ronald van Rhijn wrote:

> Hi Slau,
> the timeline insertion follows playback was indeed checked, but now unchecked 
> it doesn't make any difference. Does this function serve any other cause?
> Thought I found the problem, cause sometime I seem to lose the selection of a 
> track in the track table. but after selecting it again still no luck. the 
> first keyboard focus button I encounter is selected, which now and then 
> unselects itself,  and am working in the wave view.
> the selected selector tool sometimes changes by its own. also. The edit 
> window is always present.
> 
> Ronald
> 
> Op 21 apr 2011, om 20:46 heeft Slau Halatyn het volgende geschreven:
> 
>> Are you issuing the arrow down and arrow up commands from the Edit window or 
>> at least while the edit window is open somewhere in the background. This 
>> makes a difference when entering start and end values. Perhaps it might 
>> affect capturing values with arrow keys. Apart from that, make sure you're 
>> set to have the insertion NOT following playback in the Preferences.
>> 
>> HTH,
>> 
>> Slau
>> 
>> On Apr 21, 2011, at 2:01 PM, Ronald van Rhijn wrote:
>> 
>>> Hey Frank,
>>> That was the first thing I checked and both are selected. Like I said 
>>> earlier, the shift key don't do anything either. I have the right audio 
>>> track selected in the tracks table and made sure by scrubbing there is an 
>>> insertion point on it.
>>> Can it perhaps something to do with the keyboard focus buttons? There are 
>>> two of them in the edit window and one in the mix window.
>>> Ronald
>>> 
>>> .Op 21 apr 2011, om 19:08 heeft Frank Carmickle het volgende geschreven:
>>> 
>>>> Hi Ronald
>>>> 
>>>> You need to make sure that you have link timeline and edit selection 
>>>> checked in the options menu.  It is also helpful to have link track and 
>>>> edit selection checked so that you can use the handy control p and control 
>>>> ; to select tracks to edit.
>>>> 
>>>> HTH
>>>> --FC
>>>> 
>>>> 
>>>> 
>>>> On Apr 21, 2011, at 1:01 PM, Ronald van Rhijn wrote:
>>>> 
>>>>> Hello,
>>>>> Can anyone shed some light on why the mark in and out commands with the 
>>>>> up and down arrowkeys aren't working for me? Are there some specific 
>>>>> settings for this to work?
>>>>> selecting parts in a track with the Shift key used to work, but cannot 
>>>>> seem to get that working either.
>>>>> Many thanks in advance.
>>>>> 
>>>>> Ronald
>>>> 
>>>> 
>>> 
>> 
>> 
> 

Reply via email to