Great to know that, I found it always a pain to lose my selection after playing 
it.
Well I think I know there is no selection made with the arrowkeys cause in the 
counter display length field nothing changes. Only zeros. And when typing 
manually start and end times or holding the shift key  while scrubbing the 
length field shows the amount of time I selected.
Hope to read from you tomorrow, cause it's 9 hours later than in the US, so i 
am going to take my beauty sleep now:)
Ronald




Op 21 apr 2011, om 22:26 heeft Slau Halatyn het volgende geschreven:

> If insertion follows playback, you'll lose your selection if you engage the 
> transport after having made a selection, that is, selecting a range.
> 
> Let me ask you this:
> How do you know you don't have a selection after engaging the transport, 
> pressing down arrow at a certain point and then pressing up arrow at a later 
> point and then stopping the transport?
> 
> Slau
> 
> On Apr 21, 2011, at 3:20 PM, Ronald van Rhijn wrote:
> 
>> Hi Slau,
>> the timeline insertion follows playback was indeed checked, but now 
>> unchecked it doesn't make any difference. Does this function serve any other 
>> cause?
>> Thought I found the problem, cause sometime I seem to lose the selection of 
>> a track in the track table. but after selecting it again still no luck. the 
>> first keyboard focus button I encounter is selected, which now and then 
>> unselects itself,  and am working in the wave view.
>> the selected selector tool sometimes changes by its own. also. The edit 
>> window is always present.
>> 
>> Ronald
>> 
>> Op 21 apr 2011, om 20:46 heeft Slau Halatyn het volgende geschreven:
>> 
>>> Are you issuing the arrow down and arrow up commands from the Edit window 
>>> or at least while the edit window is open somewhere in the background. This 
>>> makes a difference when entering start and end values. Perhaps it might 
>>> affect capturing values with arrow keys. Apart from that, make sure you're 
>>> set to have the insertion NOT following playback in the Preferences.
>>> 
>>> HTH,
>>> 
>>> Slau
>>> 
>>> On Apr 21, 2011, at 2:01 PM, Ronald van Rhijn wrote:
>>> 
>>>> Hey Frank,
>>>> That was the first thing I checked and both are selected. Like I said 
>>>> earlier, the shift key don't do anything either. I have the right audio 
>>>> track selected in the tracks table and made sure by scrubbing there is an 
>>>> insertion point on it.
>>>> Can it perhaps something to do with the keyboard focus buttons? There are 
>>>> two of them in the edit window and one in the mix window.
>>>> Ronald
>>>> 
>>>> .Op 21 apr 2011, om 19:08 heeft Frank Carmickle het volgende geschreven:
>>>> 
>>>>> Hi Ronald
>>>>> 
>>>>> You need to make sure that you have link timeline and edit selection 
>>>>> checked in the options menu.  It is also helpful to have link track and 
>>>>> edit selection checked so that you can use the handy control p and 
>>>>> control ; to select tracks to edit.
>>>>> 
>>>>> HTH
>>>>> --FC
>>>>> 
>>>>> 
>>>>> 
>>>>> On Apr 21, 2011, at 1:01 PM, Ronald van Rhijn wrote:
>>>>> 
>>>>>> Hello,
>>>>>> Can anyone shed some light on why the mark in and out commands with the 
>>>>>> up and down arrowkeys aren't working for me? Are there some specific 
>>>>>> settings for this to work?
>>>>>> selecting parts in a track with the Shift key used to work, but cannot 
>>>>>> seem to get that working either.
>>>>>> Many thanks in advance.
>>>>>> 
>>>>>> Ronald
>>>>> 
>>>>> 
>>>> 
>>> 
>>> 
>> 
> 
> 

Reply via email to