OK, just wanted to make sure you were confirming properly. I'm completely 
stumped as to why your down and up arrow commands won't make a selection. If 
I'm not mistaken, no insertion point is actually necessary for the arrow keys 
to work in this way but I'll try to confirm that.

Slau

On Apr 21, 2011, at 4:44 PM, Ronald van Rhijn wrote:

> Great to know that, I found it always a pain to lose my selection after 
> playing it.
> Well I think I know there is no selection made with the arrowkeys cause in 
> the counter display length field nothing changes. Only zeros. And when typing 
> manually start and end times or holding the shift key  while scrubbing the 
> length field shows the amount of time I selected.
> Hope to read from you tomorrow, cause it's 9 hours later than in the US, so i 
> am going to take my beauty sleep now:)
> Ronald
> 
> 
> 
> 
> Op 21 apr 2011, om 22:26 heeft Slau Halatyn het volgende geschreven:
> 
>> If insertion follows playback, you'll lose your selection if you engage the 
>> transport after having made a selection, that is, selecting a range.
>> 
>> Let me ask you this:
>> How do you know you don't have a selection after engaging the transport, 
>> pressing down arrow at a certain point and then pressing up arrow at a later 
>> point and then stopping the transport?
>> 
>> Slau
>> 
>> On Apr 21, 2011, at 3:20 PM, Ronald van Rhijn wrote:
>> 
>>> Hi Slau,
>>> the timeline insertion follows playback was indeed checked, but now 
>>> unchecked it doesn't make any difference. Does this function serve any 
>>> other cause?
>>> Thought I found the problem, cause sometime I seem to lose the selection of 
>>> a track in the track table. but after selecting it again still no luck. the 
>>> first keyboard focus button I encounter is selected, which now and then 
>>> unselects itself,  and am working in the wave view.
>>> the selected selector tool sometimes changes by its own. also. The edit 
>>> window is always present.
>>> 
>>> Ronald
>>> 
>>> Op 21 apr 2011, om 20:46 heeft Slau Halatyn het volgende geschreven:
>>> 
>>>> Are you issuing the arrow down and arrow up commands from the Edit window 
>>>> or at least while the edit window is open somewhere in the background. 
>>>> This makes a difference when entering start and end values. Perhaps it 
>>>> might affect capturing values with arrow keys. Apart from that, make sure 
>>>> you're set to have the insertion NOT following playback in the Preferences.
>>>> 
>>>> HTH,
>>>> 
>>>> Slau
>>>> 
>>>> On Apr 21, 2011, at 2:01 PM, Ronald van Rhijn wrote:
>>>> 
>>>>> Hey Frank,
>>>>> That was the first thing I checked and both are selected. Like I said 
>>>>> earlier, the shift key don't do anything either. I have the right audio 
>>>>> track selected in the tracks table and made sure by scrubbing there is an 
>>>>> insertion point on it.
>>>>> Can it perhaps something to do with the keyboard focus buttons? There are 
>>>>> two of them in the edit window and one in the mix window.
>>>>> Ronald
>>>>> 
>>>>> .Op 21 apr 2011, om 19:08 heeft Frank Carmickle het volgende geschreven:
>>>>> 
>>>>>> Hi Ronald
>>>>>> 
>>>>>> You need to make sure that you have link timeline and edit selection 
>>>>>> checked in the options menu.  It is also helpful to have link track and 
>>>>>> edit selection checked so that you can use the handy control p and 
>>>>>> control ; to select tracks to edit.
>>>>>> 
>>>>>> HTH
>>>>>> --FC
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> On Apr 21, 2011, at 1:01 PM, Ronald van Rhijn wrote:
>>>>>> 
>>>>>>> Hello,
>>>>>>> Can anyone shed some light on why the mark in and out commands with the 
>>>>>>> up and down arrowkeys aren't working for me? Are there some specific 
>>>>>>> settings for this to work?
>>>>>>> selecting parts in a track with the Shift key used to work, but cannot 
>>>>>>> seem to get that working either.
>>>>>>> Many thanks in advance.
>>>>>>> 
>>>>>>> Ronald
>>>>>> 
>>>>>> 
>>>>> 
>>>> 
>>>> 
>>> 
>> 
>> 
> 

Reply via email to