Who makes it, digidesign? -----Original Message----- From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of Nick Gawronski Sent: Saturday, January 26, 2013 5:24 PM To: ptaccess@googlegroups.com Subject: Re: Good control surfaces
Hi, I have the digi 003 which you can still find on line. It has 8 sliding up and down controls which move with pro tools so you can feel your levels. I like it for a new pro tools user. My digi 003 came in a box wrapped up and all. It can record in 24 bit 96 KHZ so it is a good system and some studios still use them so it is a good system for both the new and advanced user and has a control where if you have more then 8 tracks you can cycle between the tracks in banks of 8. I was at the guitar center store and they had one on display and found one on line that they were able to ship directly to my house and I always like to feel a device before I buy it. You will need to install the drivers for the device once you get it or even before you get it you can download them and I would also suggest if pro tools prompts you to upgrade the firmware on the device you do so to avoid any issues in the future. Nick Gawronski Jed Barton <j...@jedbarton.com> wrote: >Hey gang, > >I'm thinking I would get a control surface for protools, any good ones? >I like the scrub wheel idea. Does this also act as an in and out for >plugging in mics and stuff, or is it strictly control. I think the >scrub wheel thing would rock. > >Thanks,Jed > >-- > > --