well, a DM is private, right?
P.S. Just curious. Who is behind that Logic with
speech site? I forget the exact name of it.
Basically, it was a long rant when I checked it,
not much in the way of guides, tutorials, or real
info. Perhaps my mind tuned out halfway through and I missed something.
At 10:59 PM 12/15/2015, you wrote:
Slau,
You say, "Saw your direct message."
So... it's now ok to ask you questions over
Twitter? I seem to remember you almost biting
my head off when I did so, and us having a
discussion about why my quote: folloers, don't wanna see that crap.
Now, I'm totally confused.
Which is it? Can we, or can we not.
Chris.
----- Original Message -----
From: <mailto:slauhala...@gmail.com>Slau Halatyn
To: <mailto:ptaccess@googlegroups.com>ptaccess@googlegroups.com
Sent: Tuesday, December 15, 2015 7:39 PM
Subject: Re: getting PT to see my C24
Hi Satauna,
Saw your direct message before I saw this one
so, just responding here as well, although in a
condensed fashion. See my other message for more detail.
Ethernet tab of the Peripherals dialog under the
Setup menu. Enable the Ethernet port checkbox
and select the C|24 from the pop-up menus. If it
doesn't work the first time, reboot the computer
and try again. I had an invisible C|24 the first
time I ran the v12 beta and it worked after a
reboot. Let me know if that works.
Best,
Slau
On Dec 15, 2015, at 4:54 PM, Satauna Howery
<<mailto:sata...@gmail.com>sata...@gmail.com> wrote:
Hi, all,
I’ve got a ProTools HD Native system running
PT 12.3.1, and my “control surface†is a
c24. PT sees my HDIO interface and lets me
select that playback engine, but it doesn’t
see the C24. The c24 says it’s offline, so I
know it’s not being recognized. Network
lights show activity on both the mac and c24
sides. There is nothing indicating the control
surface is present in the Setup menus of ProTools.
Incidentally, this is a new system that has
never been connected. This is not a case where
the c24 was once there and now isn’t.
On the c24, Line out 1-8 is going to analog in
on the HDIO, and ProTools In on the C24 is
going to Analog outs 1-8 on the HDIO.
What am I missing here? Looking at the manuals,
but figured I’d ask here, too.
Thanks, and happiest of holidays to everyone!!
Satauna
--
You received this message because you are
subscribed to the Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
<mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com.
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are
subscribed to the Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
<mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com.
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are
subscribed to the Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
<mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com.
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
---
<http://www.shareasale.com/r.cfm?b=635671&u=1109457&m=54749&urllink=&afftrack=>Learn
to meditate and train your brain with Muse, the
first lab-grade EEG biofeedback headband for home use!
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.