Hello Slau,
I have heard that the Roland Studio Capture will work with ProTools, and
if you have 2, you could do 32 channels. Have you tried that one?
On 07/10/2016 19:30, Slau Halatyn wrote:
Hi Jack,
I can’t answer that yet but, suffice it to say, we’re in the process
of procuring both of those interfaces to make an assessment on the
accessibility. The software for the MTRX appears, at the outset, to
look promising but I’ll have to have an interface in order to see
whether all of the controls are visible. I have no idea about the
Element software yet but will report here as soon as I know anything.
Best,
Slau
On Oct 7, 2016, at 1:50 PM, Jack Ronnayut <ronnaj...@gmail.com
<mailto:ronnaj...@gmail.com>> wrote:
Hi Slau and all!
I am looking for a new interface as well. What might be more
Accessible between Apogee Element that you mentioned and Avid MTRX? I
also plan to record drums in my studio.
Thank you so much. Any answer would be appreciated.
Jack
Ronnayut Ingsa (Jack)
The Director of TAB Music Academy (TABMA)
THAILAND ASSOCIATION OF THE BLIND(TAB)
85/1-3 SOI BUN YU,DINDANG Rd. SAMSENNAI, PHAYATHAI
BANGKOK 10400 THAILAND
MOBILE: +66618414446
TEL: +66 2246 3835
FAX: +66 2245 9846
EMAIL:ronnaj...@gmail.com <mailto:ronnaj...@gmail.com>
SKYPE NAME: jackjack_gt
LINE ID: ronnajack
website :tab.or.th <http://tab.or.th/>
*From:*ptaccess@googlegroups.com <mailto:ptaccess@googlegroups.com>
[mailto:ptaccess@googlegroups.com]*On Behalf Of*Slau Halatyn
*Sent:*Wednesday, September 28, 2016 8:54 PM
*To:*ptaccess@googlegroups.com <mailto:ptaccess@googlegroups.com>
*Subject:*Re: VoiceOver Accessible soundcard for ProTolls and Logic
Hi Jørgen,
Depending upon what kind of I/O scenario you’re looking for, Apogee
just released three new interfaces yesterday that are more affordable
than their previous offerings. They are the Element series interfaces
and are all Thunderbolt compatible. Thus far, all Apogee interfaces
have used an application called Maestro to access the interface
settings. The software is almost entirely accessible and it’s also
possible to set a number of parameters from the units themselves.
Unless these new interfaces have somehow deviated from Apogee’s path
all these years, they should be quite useable. As always, the only
true test is getting one and trying it. Hope that helps a bit,
Slau
On Sep 28, 2016, at 7:07 AM, Jørgen Skov Nielsen <jnoe...@gmail.com
<mailto:jnoe...@gmail.com>> wrote:
hi list
I will buy a new sound interface but whitch should i buy?
I have usb 3.0 and thunderbolt. Is there a soundcard, were the
controlpanel is accessible with voiceover? Should the soundcard's
from Uad or Focusrite be a solution?
I have found a sound interface from Uad with a quard core
processor, the soundinterface is the Uad Apollo 8p Thunderbolt 2
Audio Interface
Should that be a solution?
Best regards
Jørgen
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email toptaccess+unsubscr...@googlegroups.com
<mailto:ptaccess+unsubscr...@googlegroups.com>.
For more options, visithttps://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email toptaccess+unsubscr...@googlegroups.com
<mailto:ptaccess+unsubscr...@googlegroups.com>.
For more options, visithttps://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email toptaccess+unsubscr...@googlegroups.com
<mailto:ptaccess+unsubscr...@googlegroups.com>.
For more options, visithttps://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to ptaccess+unsubscr...@googlegroups.com
<mailto:ptaccess+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
Regards,
Samuel Wilkins
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
