Hi Samuel, No, I haven’t had any experience with any Roland interfaces. As with many interfaces, they can generally work fine with a “set it and forget it” kind of situation but, if you need to change parameters in some cases, it’s not accessible. If Roland has a software control panel, chances are it’s not accessible. I’d be quite surprised if it was. There is some potential if an interface has an iOS version of their control panel but I can’t think of any that do. Slau
> On Oct 8, 2016, at 4:14 AM, Samuel Wilkins <sound...@spwnet.co.uk> wrote: > > Hello Slau, > I have heard that the Roland Studio Capture will work with ProTools, and if > you have 2, you could do 32 channels. Have you tried that one? > > On 07/10/2016 19:30, Slau Halatyn wrote: >> Hi Jack, >> I can’t answer that yet but, suffice it to say, we’re in the process of >> procuring both of those interfaces to make an assessment on the >> accessibility. The software for the MTRX appears, at the outset, to look >> promising but I’ll have to have an interface in order to see whether all of >> the controls are visible. I have no idea about the Element software yet but >> will report here as soon as I know anything. >> Best, >> Slau >> >>> On Oct 7, 2016, at 1:50 PM, Jack Ronnayut <ronnaj...@gmail.com >>> <mailto:ronnaj...@gmail.com>> wrote: >>> >>> Hi Slau and all! >>> I am looking for a new interface as well. What might be more >>> Accessible between Apogee Element that you mentioned and Avid MTRX? I also >>> plan to record drums in my studio. >>> Thank you so much. Any answer would be appreciated. >>> Jack >>> >>> Ronnayut Ingsa (Jack) >>> The Director of TAB Music Academy (TABMA) >>> THAILAND ASSOCIATION OF THE BLIND(TAB) >>> 85/1-3 SOI BUN YU,DINDANG Rd. SAMSENNAI, PHAYATHAI >>> BANGKOK 10400 THAILAND >>> MOBILE: +66618414446 >>> TEL: +66 2246 3835 >>> FAX: +66 2245 9846 >>> EMAIL: ronnaj...@gmail.com <mailto:ronnaj...@gmail.com> >>> SKYPE NAME: jackjack_gt >>> LINE ID: ronnajack >>> website : tab.or.th <http://tab.or.th/> >>> >>> From: ptaccess@googlegroups.com <mailto:ptaccess@googlegroups.com> >>> [mailto:ptaccess@googlegroups.com <mailto:ptaccess@googlegroups.com>] On >>> Behalf Of Slau Halatyn >>> Sent: Wednesday, September 28, 2016 8:54 PM >>> To: ptaccess@googlegroups.com <mailto:ptaccess@googlegroups.com> >>> Subject: Re: VoiceOver Accessible soundcard for ProTolls and Logic >>> >>> Hi Jørgen, >>> Depending upon what kind of I/O scenario you’re looking for, Apogee just >>> released three new interfaces yesterday that are more affordable than their >>> previous offerings. They are the Element series interfaces and are all >>> Thunderbolt compatible. Thus far, all Apogee interfaces have used an >>> application called Maestro to access the interface settings. The software >>> is almost entirely accessible and it’s also possible to set a number of >>> parameters from the units themselves. Unless these new interfaces have >>> somehow deviated from Apogee’s path all these years, they should be quite >>> useable. As always, the only true test is getting one and trying it. Hope >>> that helps a bit, >>> Slau >>> >>>> On Sep 28, 2016, at 7:07 AM, Jørgen Skov Nielsen <jnoe...@gmail.com >>>> <mailto:jnoe...@gmail.com>> wrote: >>>> >>>> >>>>> hi list >>>>> >>>>> I will buy a new sound interface but whitch should i buy? >>>>> I have usb 3.0 and thunderbolt. Is there a soundcard, were the >>>>> controlpanel is accessible with voiceover? Should the soundcard's from >>>>> Uad or Focusrite be a solution? >>>>> I have found a sound interface from Uad with a quard core processor, the >>>>> soundinterface is the Uad Apollo 8p Thunderbolt 2 Audio Interface >>>>> >>>>> Should that be a solution? >>>>> Best regards >>>>> Jørgen >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com >>>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>>> For more options, visit https://groups.google.com/d/optout >>>> <https://groups.google.com/d/optout>. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com >>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com >>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com >> <mailto:ptaccess+unsubscr...@googlegroups.com>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > -- > Regards, > > Samuel Wilkins > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com > <mailto:ptaccess+unsubscr...@googlegroups.com>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
