wow, sounds like a great budget interface. Anyone know how accessible it is on the Windows side for changing things like buffer size, sampling rate etc.?

At 12:44 PM 4/17/2017, you wrote:
The UMC404HD is $99 .
Behringer UMC404HD


4 input combo XLR/1/4 inputs.
4 Gain knobs.
Above each knob is a pair of buttons.
Left is instrument/Line (push in for instrument mode)
Right is Pad Switch.

Stereo mono button pushed in is mono. Allows you to monitor incoming input signals in Mono or stereo.
 .
Mix knob is next to Stereo/Mono switch. Fully counter clockwise you only hear direct input, Fully clockwise you only hear DAW output. The in-between positions blend the input with the DAW Playback.
Below that is Main output level.
Next to Mix knob is Output a/b button This sets which outputs go to the headphone jack. Allows you to monitor whats being routed to Outputs group A (1/2) or Output Group b (3/4) on the headphones. Next to that button is the Headphone Volume with the 1/4 headphone jack below it

Back Panel
Starting on Side opposite the power and USB connectors.
Inserts
1 top 2 bottom
3 top 4 bottom
3 and  four next to XLR Main out jacks.
Main Outs
XLR left  is next to inserts and then XLR right.
Next to XLR main outs is 1/4 main outs.
Top is left.  Bottom is right
Next is the OutPut A/B pairs. If your DAW Gives you a Stereo out, Output 1/2 and output 3/4 then you can route to the 3 pairs of outputs all individually.
Stereo outs = Main outs
1/2 = Output group A
3/4 =Output group b
If it only gives you output 1/2 and 3/4 then the same signal is sent to Main outs and output group Outputs group A. And B are available on 1/4 or RCA jacks. Output pair A (also will show as 1/2 in DAW) 1/4 jack Top is left, bottom 1/4 jack is right. Followed By the RCA outputs pair for Output A. Next is RCA outputs for Output pair B then the 1/4 jacks for that pair of outputs. Next to those are the Phantom power switch. Phantom power is on when pushed towards side of the 1/4 jacks.
Next to those are Midi in/outs.
Midi in next to phantom power then midi out
Next to Midi Out is USB followed by power adapter input.

On Apr 17, 2017, at 12:03 PM, Christopher-Mark Gilland <<mailto:clgillan...@gmail.com>clgillan...@gmail.com> wrote:

Send me the one for the 404. And, how much is it? I'd highly consider it.
---
Christopher Gilland
Co-founder of Genuine Safe Haven Ministries

<http://www.gshministry.org/>http://www.gshministry.org
(980) 500-9575
----- Original Message -----
From: <mailto:monkeypushe...@gmail.com>TheOreoMonster
To: <mailto:ptaccess@googlegroups.com>ptaccess@googlegroups.com
Sent: Monday, April 17, 2017 12:02 PM
Subject: Re: seperate inputs into multiple tracks, I'm in a predicament.

Nope, in this case I am assuming they mean HD as in High Definition or something like that. The HD versions of the interface are 24 bit/192khz were as the non HD versions are only 24bit/96khz. Eitherway ProTOols HD isn’t required.
202HD is 2 inputs and two outputs.
204HD is 2 inputs, 4 outputs.
404HD is 4 inputs, 4 outputs.

I personally own the 404HD so if you need a text layout for that one I can share. Otherwise call Behringer support, after receiving your unit and getting it unboxed, they are great at assisting with that sort of stuff.
On Apr 17, 2017, at 11:57 AM, Christopher-Mark Gilland <<mailto:clgillan...@gmail.com>clgillan...@gmail.com> wrote:

Now, you keep saying HD. I don't need PproTools HD to make this work, do I? I don't have an HD license. All I have is the standard ProTools. Could that potentially be an issue?

--
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to <mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com. For more options, visit <https://groups.google.com/d/optout>https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to <mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com. For more options, visit <https://groups.google.com/d/optout>https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to <mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com. For more options, visit <https://groups.google.com/d/optout>https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to <mailto:ptaccess+unsubscr...@googlegroups.com>ptaccess+unsubscr...@googlegroups.com. For more options, visit <https://groups.google.com/d/optout>https://groups.google.com/d/optout.



----------------------------------------
"There are two means of refuge from the miseries of life: music and cats." - Albert Schweitzer
--
You received this message because you are subscribed to the Google Groups "Pro Tools 
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to