No need to use the low-level QOM API when an object inherits from QDev. Directly use the QDev API to set its properties.
Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org> --- hw/avr/arduino.c | 4 ++-- hw/avr/atmega.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/avr/arduino.c b/hw/avr/arduino.c index 48ef478346..428e6e1b2d 100644 --- a/hw/avr/arduino.c +++ b/hw/avr/arduino.c @@ -15,6 +15,7 @@ #include "atmega.h" #include "boot.h" #include "qom/object.h" +#include "hw/qdev-properties.h" struct ArduinoMachineState { /*< private >*/ @@ -44,8 +45,7 @@ static void arduino_machine_init(MachineState *machine) ArduinoMachineState *ams = ARDUINO_MACHINE(machine); object_initialize_child(OBJECT(machine), "mcu", &ams->mcu, amc->mcu_type); - object_property_set_uint(OBJECT(&ams->mcu), "xtal-frequency-hz", - amc->xtal_hz, &error_abort); + qdev_prop_set_uint64(DEVICE(&ams->mcu), "xtal-frequency-hz", amc->xtal_hz); sysbus_realize(SYS_BUS_DEVICE(&ams->mcu), &error_abort); if (machine->firmware) { diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c index a34803e642..e6ebc7473a 100644 --- a/hw/avr/atmega.c +++ b/hw/avr/atmega.c @@ -327,8 +327,8 @@ static void atmega_realize(DeviceState *dev, Error **errp) devname = g_strdup_printf("timer%zu", i); object_initialize_child(OBJECT(dev), devname, &s->timer[i], TYPE_AVR_TIMER16); - object_property_set_uint(OBJECT(&s->timer[i]), "cpu-frequency-hz", - s->xtal_freq_hz, &error_abort); + qdev_prop_set_uint64(DEVICE(&s->timer[i]), "cpu-frequency-hz", + s->xtal_freq_hz); sbd = SYS_BUS_DEVICE(&s->timer[i]); sysbus_realize(sbd, &error_abort); sysbus_mmio_map(sbd, 0, OFFSET_DATA + mc->dev[idx].addr); -- 2.38.1