Appending the root device does not change the scenario :
qemu-system-aarch64 \
-smp 4 \
-m 2048 \
-cpu cortex-a72 \
-machine virt \
-serial stdio \
-initrd
/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat
\
-kernel
/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image
\
-append "console=ttyAMA0,38400 drm.debug=0x0 rootwait rootdelay=5
root=/dev/vdd1 rw"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.6.36-g01aac93821d2-v8 (kleaf@build-host)
(Android (11368308, +pgo, +bolt, +lto, +mlgo, based on r510928)
clang version 18.0.0 (
https://android.googlesource.com/toolchain/llvm-project
477610d4d0d988e69dbc3fae4fe86bff3f07f2b5), LLD 18.0.0) #
1 SMP PREEMPT Tue Jul 2 09:02:32 UTC 2024
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] NoSplit zone start for each node
[ 0.000000] NoMerge zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000040000000-0x00000000bfffffff]
[ 0.000000] cma: Reserved 8 MiB at 0x00000000bd000000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 31 pages/cpu s87016 r8192 d31768 u126976
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or
1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyAMA0,38400 drm.debug=0x0
rootwait rootdelay=5 root=/dev/vdd1 rw androidboot.serialno=100
00000abcd1234 androidboot.btmacaddr=11:22:33:44:55:66
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
516096
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap
free:off
[ 0.000000] Memory: 1881596K/2097152K available (19328K kernel code,
2374K rwdata, 7612K rodata, 1792K init, 1192K bss, 207364K rese
rved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 56269 entries in 220 pages
[ 0.000000] ftrace: allocated 220 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to
nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is
25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on
contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff
max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.000069] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every
4398046511096ns
[ 0.003628] kfence: initialized - using 2097152 bytes for 255 objects at
0x(____ptrval____)-0x(____ptrval____)
[ 0.010906] Calibrating delay loop (skipped), value calculated using
timer frequency.. 125.00 BogoMIPS (lpj=250000)
[ 0.011082] pid_max: default: 32768 minimum: 301
[ 0.013020] LSM: initializing lsm=capability,selinux,integrity
[ 0.013436] SELinux: Initializing.
[ 0.016921] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes,
linear)
[ 0.016984] Mountpoint-cache hash table entries: 4096 (order: 3, 32768
bytes, linear)
[ 0.031469] cgroup: Disabling memory control group subsystem
[ 0.050059] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.059978] RCU Tasks: Setting shift to 2 and lim to 1
rcu_task_cb_adjust=1.
[ 0.060584] RCU Tasks Rude: Setting shift to 2 and lim to 1
rcu_task_cb_adjust=1.
[ 0.060822] RCU Tasks Trace: Setting shift to 2 and lim to 1
rcu_task_cb_adjust=1.
[ 0.062427] rcu: Hierarchical SRCU implementation.
[ 0.062463] rcu: Max phase no-delay instances is 1000.
[ 0.068568] EFI services will not be available.
[ 0.071086] smp: Bringing up secondary CPUs ...
[ 0.074801] Detected PIPT I-cache on CPU1
[ 0.075909] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.081065] Detected PIPT I-cache on CPU2
[ 0.081470] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.083873] Detected PIPT I-cache on CPU3
[ 0.084168] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.084681] smp: Brought up 1 node, 4 CPUs
[ 0.084715] SMP: Total of 4 processors activated.
[ 0.084800] CPU features: detected: 32-bit EL0 Support
[ 0.084824] CPU features: detected: 32-bit EL1 Support
[ 0.084885] CPU features: detected: CRC32 instructions
[ 0.088191] CPU features: emulated: Privileged Access Never (PAN) using
TTBR0_EL1 switching
[ 0.088512] CPU: All CPU(s) started at EL1
[ 0.088714] alternatives: applying system-wide alternatives
[ 0.113756] devtmpfs: initialized
[ 0.126262] Enabled cp15_barrier support
[ 0.126449] Enabled setend support
[ 0.127708] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.127840] futex hash table entries: 1024 (order: 4, 65536 bytes,
linear)
[ 0.131302] pinctrl core: initialized pinctrl subsystem
[ 0.138216] DMI not present or invalid.
[ 0.147664] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.158502] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic
allocations
[ 0.158987] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.159303] audit: initializing netlink subsys (disabled)
[ 0.161302] audit: type=2000 audit(0.148:1): state=initialized
audit_enabled=0 res=1
[ 0.164412] thermal_sys: Registered thermal governor 'step_wise'
[ 0.164806] cpuidle: using governor menu
[ 0.165816] hw-breakpoint: found 6 breakpoint and 4 watchpoint
registers.
[ 0.166975] ASID allocator initialised with 32768 entries
[ 0.168385] Serial: AMBA PL011 UART driver
[ 0.196712] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13,
base_baud = 0) is a PL011 rev1
[ 0.198278] printk: console [ttyAMA0] enabled
[ 0.224278] Modules: 2G module region forced by
RANDOMIZE_MODULE_REGION_FULL
[ 0.224486] Modules: 0 pages in range for non-PLT usage
[ 0.224510] Modules: 516176 pages in range for PLT usage
[ 0.241442] iommu: Default domain type: Translated
[ 0.241679] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.244200] SCSI subsystem initialized
[ 0.245459] usbcore: registered new interface driver usbfs
[ 0.245841] usbcore: registered new interface driver hub
[ 0.246154] usbcore: registered new device driver usb
[ 0.247257] mc: Linux media interface: v0.10
[ 0.247617] videodev: Linux video capture interface: v2.00
[ 0.248602] pps_core: LinuxPPS API ver. 1 registered
[ 0.248700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.248967] PTP clock support registered
[ 0.251884] Advanced Linux Sound Architecture Driver Initialized.
[ 0.262663] Bluetooth: Core ver 2.22
[ 0.262960] NET: Registered PF_BLUETOOTH protocol family
[ 0.263069] Bluetooth: HCI device and connection manager initialized
[ 0.263344] Bluetooth: HCI socket layer initialized
[ 0.263516] Bluetooth: L2CAP socket layer initialized
[ 0.263840] Bluetooth: SCO socket layer initialized
[ 0.266790] vgaarb: loaded
[ 0.268841] clocksource: Switched to clocksource arch_sys_counter
[ 0.272056] VFS: Disk quotas dquot_6.6.0
[ 0.272284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.273060] FS-Cache: Loaded
[ 0.278526] CacheFiles: Loaded
[ 0.287007] NET: Registered PF_INET protocol family
[ 0.288390] IP idents hash table entries: 32768 (order: 6, 262144 bytes,
linear)
[ 0.297021] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2,
16384 bytes, linear)
[ 0.297273] Table-perturb hash table entries: 65536 (order: 6, 262144
bytes, linear)
[ 0.297485] TCP established hash table entries: 16384 (order: 5, 131072
bytes, linear)
[ 0.298036] TCP bind hash table entries: 16384 (order: 7, 524288 bytes,
linear)
[ 0.298873] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.301283] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes,
linear)
[ 0.301759] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.302186] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes,
linear)
[ 0.304009] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.306868] PCI: CLS 0 bytes, default 64
[ 0.312145] Trying to unpack rootfs image as initramfs...
[ 0.312808] kvm [1]: HYP mode not available
[ 0.318856] rootfs image is not initramfs (invalid magic at start of
compressed archive); looks like an initrd
[ 0.335544] Initialise system trusted keyrings
[ 0.338430] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.339134] zbud: loaded
[ 0.347742] Key type cifs.idmap registered
[ 0.348673] fuse: init (API version 7.39)
[ 0.386722] Key type asymmetric registered
[ 0.386992] Asymmetric key parser 'x509' registered
[ 0.387460] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 244)
[ 0.388796] io scheduler mq-deadline registered
[ 0.388954] io scheduler kyber registered
[ 0.389319] io scheduler bfq registered
[ 0.406358] vc-mem: phys_addr:0x00000000 mem_base=0x00000000
mem_size:0x00000000(0 MiB)
[ 0.476330] brd: module loaded
[ 0.508286] loop: module loaded
[ 0.512092] Loading iSCSI transport class v2.0-870.
[ 0.522449] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for
information.
[ 0.522729] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <
ja...@zx2c4.com>. All Rights Reserved.
[ 0.538429] tun: Universal TUN/TAP device driver, 1.6
[ 0.541953] usbcore: registered new interface driver brcmfmac
[ 0.542290] usbcore: registered new device driver r8152-cfgselector
[ 0.542675] usbcore: registered new interface driver r8152
[ 0.542971] usbcore: registered new interface driver lan78xx
[ 0.543488] usbcore: registered new interface driver asix
[ 0.543810] usbcore: registered new interface driver ax88179_178a
[ 0.544134] usbcore: registered new interface driver cdc_ether
[ 0.544609] usbcore: registered new interface driver smsc95xx
[ 0.544909] usbcore: registered new interface driver net1080
[ 0.545240] usbcore: registered new interface driver cdc_subset
[ 0.545596] usbcore: registered new interface driver zaurus
[ 0.545896] usbcore: registered new interface driver cdc_ncm
[ 0.546192] usbcore: registered new interface driver r8153_ecm
[ 0.547442] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.550591] usbcore: registered new interface driver cdc_acm
[ 0.550756] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 0.551948] usbcore: registered new interface driver uas
[ 0.552352] usbcore: registered new interface driver usb-storage
[ 0.566050] usbcore: registered new interface driver cp210x
[ 0.566791] usbserial: USB Serial support registered for cp210x
[ 0.567318] usbcore: registered new interface driver pl2303
[ 0.567653] usbserial: USB Serial support registered for pl2303
[ 0.573531] mousedev: PS/2 mouse device common for all mice
[ 0.573930] usbcore: registered new interface driver xpad
[ 0.574228] usbcore: registered new interface driver usb_acecad
[ 0.574588] usbcore: registered new interface driver aiptek
[ 0.574937] usbcore: registered new interface driver hanwang
[ 0.575292] usbcore: registered new interface driver kbtab
[ 0.577388] usbcore: registered new interface driver usbtouchscreen
[ 0.580179] i2c_dev: i2c /dev entries driver
[ 0.584010] ir_imon_decoder: IR iMON protocol handler initialized
[ 0.584179] IR JVC protocol handler initialized
[ 0.584296] IR MCE Keyboard/mouse protocol handler initialized
[ 0.584435] IR NEC protocol handler initialized
[ 0.584734] IR RC5(x/sz) protocol handler initialized
[ 0.584863] IR RC6 protocol handler initialized
[ 0.584991] IR RCMM protocol handler initialized
[ 0.585111] IR SANYO protocol handler initialized
[ 0.585226] IR Sharp protocol handler initialized
[ 0.585358] IR Sony protocol handler initialized
[ 0.585477] IR XMP protocol handler initialized
[ 0.586421] usbcore: registered new interface driver uvcvideo
[ 0.589015] device-mapper: uevent: version 1.0.3
[ 0.590448] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised:
dm-de...@redhat.com
[ 0.591924] Bluetooth: HCI UART driver ver 2.3
[ 0.592106] Bluetooth: HCI UART protocol H4 registered
[ 0.592885] Bluetooth: HCI UART protocol Broadcom registered
[ 0.594293] sdhci: Secure Digital Host Controller Interface driver
[ 0.594442] sdhci: Copyright(c) Pierre Ossman
[ 0.594948] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.596987] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.599350] hid: raw HID events driver (C) Jiri Kosina
[ 0.612270] usbcore: registered new interface driver usbhid
[ 0.612441] usbhid: USB HID core driver
[ 0.615743] ashmem: initialized
[ 0.617297] SPI driver st-accel-spi has no spi_device_id for
st,lis302dl-spi
[ 0.617473] SPI driver st-accel-spi has no spi_device_id for
st,lis3lv02dl-accel
[ 0.617626] SPI driver st-accel-spi has no spi_device_id for
st,lis3dh-accel
[ 0.617769] SPI driver st-accel-spi has no spi_device_id for
st,lsm330d-accel
[ 0.617919] SPI driver st-accel-spi has no spi_device_id for
st,lsm330dl-accel
[ 0.618062] SPI driver st-accel-spi has no spi_device_id for
st,lsm330dlc-accel
[ 0.618206] SPI driver st-accel-spi has no spi_device_id for
st,lis331dlh-accel
[ 0.618357] SPI driver st-accel-spi has no spi_device_id for
st,lsm330-accel
[ 0.618493] SPI driver st-accel-spi has no spi_device_id for
st,lsm303agr-accel
[ 0.618638] SPI driver st-accel-spi has no spi_device_id for
st,lis2dh12-accel
[ 0.618775] SPI driver st-accel-spi has no spi_device_id for
st,lng2dm-accel
[ 0.618911] SPI driver st-accel-spi has no spi_device_id for
st,h3lis331dl-accel
[ 0.619056] SPI driver st-accel-spi has no spi_device_id for
st,lis331dl-accel
[ 0.619209] SPI driver st-accel-spi has no spi_device_id for
st,lsm303c-accel
[ 0.620207] SPI driver st-magn-spi has no spi_device_id for
st,lis3mdl-magn
[ 0.620355] SPI driver st-magn-spi has no spi_device_id for
st,lsm303agr-magn
[ 0.620510] SPI driver st-magn-spi has no spi_device_id for
st,lsm9ds1-magn
[ 0.620768] SPI driver st-magn-spi has no spi_device_id for
st,lsm303c-magn
[ 0.626130] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7
counters available
[ 0.630320] usbcore: registered new interface driver snd-usb-audio
[ 0.638439] Mirror/redirect action on
[ 0.639343] netem: version 1.3
[ 0.639435] u32 classifier
[ 0.639508] input device check on
[ 0.639602] Actions configured
[ 0.648469] xt_time: kernel timezone is -0000
[ 0.649096] gre: GRE over IPv4 demultiplexor driver
[ 0.649255] IPv4 over IPsec tunneling driver
[ 0.654843] Initializing XFRM netlink socket
[ 0.655213] IPsec XFRM device driver
[ 0.676037] NET: Registered PF_INET6 protocol family
[ 0.687646] Segment Routing with IPv6
[ 0.687964] In-situ OAM (IOAM) with IPv6
[ 0.689074] mip6: Mobile IPv6
[ 0.693823] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.699298] NET: Registered PF_PACKET protocol family
[ 0.699567] NET: Registered PF_KEY protocol family
[ 0.699819] Key type dns_resolver registered
[ 0.798005] Freeing initrd memory: 131072K
[ 0.806166] registered taskstats version 1
[ 0.807819] Loading compiled-in X.509 certificates
[ 0.834497] Key type .fscrypt registered
[ 0.834641] Key type fscrypt-provisioning registered
[ 0.841634] of_cfs_init
[ 0.842079] of_cfs_init: OK
[ 0.845830] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 0.876283] Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 0.877632] Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 0.878441] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.879187] Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 0.885017] clk: Disabling unused clocks
[ 0.885499] ALSA device list:
[ 0.885646] No soundcards found.
[ 0.894059] uart-pl011 9000000.pl011: no DMA platform data
[ 0.895672] Waiting 5 sec before mounting root device...
[ 6.132758] RAMDISK: Couldn't find valid RAM disk image starting at 0.
[ 6.133865] Waiting for root device /dev/vdd1...
[ 10.994096] platform gpio-keys: deferred probe pending
On Sun, Aug 25, 2024 at 2:30 PM Mario Marietto <marietto2...@gmail.com>
wrote:
> When I unpack this file :
>
> lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv.img
>
> I get these files :
>
> 0.fat
> 1.img
> 2.img
> 3.img
>
> So,I assume that :
>
> 0.fat is : initrd
> 1.img is : system-rw.img
> 2.img is : vendor-rw.img
> 3.img is : userdata.img
>
> If I use 0.fat as initrd,like this :
>
> -initrd
> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat
>
> I get this message :
>
> rootfs image is not initramfs (invalid magic at start of compressed
> archive); looks like an initrd
>
> it looks like an initrd : right,it's true : it is initrd. (for this reason
> I've assumed that 0.fat is initrd...
>
>
> On Sun, Aug 25, 2024 at 1:26 PM Peter Maydell <peter.mayd...@linaro.org>
> wrote:
>
>> On Sun, 25 Aug 2024 at 11:45, Mario Marietto <marietto2...@gmail.com>
>> wrote:
>> >
>> > Please look at this example :
>> >
>> > qemu-system-aarch64 \
>> > -smp 4 \
>> > -m 2048 \
>> > -cpu cortex-a72 \
>> > -machine virt \
>> > -serial stdio \
>> > -kernel
>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image
>> \
>>
>> This (assuming it's the complete command line your script is
>> running) doesn't pass any arguments telling QEMU to provide a
>> root disk, and it doesn't pass any arguments to the kernel
>> telling it what root disk to use...
>>
>> > [ 0.000000] Kernel command line: console=ttyAMA0,115200
>> kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
>> androidboot.serialno=10000000abcd1234
>> androidboot.btmacaddr=11:22:33:44:55:66
>>
>> ...so the kernel defaults to "/dev/mmcblk0p2" as its root disk because
>> it's using the command line argument that was compiled into it...
>>
>> > [ 0.658240] Waiting for root device /dev/mmcblk0p2...
>>
>> ...and then it's hanging around forever waiting for that.
>>
>> You need to:
>> (1) pass QEMU arguments telling it to provide a root fs
>> (2) pass the kernel arguments telling it to look for the
>> root fs in the place where QEMU is providing it
>>
>> Your other command line looks more on the right lines:
>>
>> -kernel
>>
>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image
>> \
>> -initrd
>>
>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat
>> \
>> -drive
>> index=0,if=none,id=system,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/1.img
>> \
>> -device virtio-blk-pci,drive=system \
>> -drive
>> index=1,if=none,id=vendor,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/2.img
>> \
>> -device virtio-blk-pci,drive=vendor \
>> -drive
>> index=2,if=none,id=userdata,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/3.img
>> \
>> -device virtio-blk-pci,drive=userdata \
>>
>> though I wonder if the kernel really expects a
>> FAT file for the initrd, given it complains:
>>
>> [ 0.344033] Trying to unpack rootfs image as initramfs...
>> [ 0.344947] rootfs image is not initramfs (invalid magic at start
>> of compressed archive); looks like an initrd
>>
>> and then later
>>
>> [ 5.905329] RAMDISK: Couldn't find valid RAM disk image starting at 0.
>>
>> I think if I were you I'd start by figuring out what's going on
>> with the initrd.
>>
>> thanks
>> -- PMM
>>
>
>
> --
> Mario.
>
--
Mario.
