The file below is called config.txt and it's available only if Android is installed physically. I don't see it when I unpack the main img file. Probably it is embedded inside the file 0.fat,or 1.img,who knows. Anyway,Is useful to understand what's the name of the initrd file. Actually I tried to use 0.fat,but I think it's wrong. Can you give a look at the file below and tell me if it could be "ramdisk.img" ?
# Kernel arm_64bit=1 kernel=Image # Ramdisk gpio=21=ip,pu [gpio21=1] initramfs ramdisk.img followkernel [gpio21=0] initramfs ramdisk-recovery.img followkernel [all] # Audio dtparam=audio=on # Audio DAC #dtoverlay=allo-boss-dac-pcm512x-audio #dtoverlay=allo-piano-dac-pcm512x-audio #dtoverlay=allo-piano-dac-plus-pcm512x-audio #dtoverlay=hifiberry-dacplus #dtoverlay=i-sabre-q2m #dtoverlay=iqaudio-dac #dtoverlay=justboom-dac # Boot device dtoverlay=android-sdcard #dtoverlay=android-usb #dtoverlay=android-nvme # Camera camera_auto_detect=1 start_x=1 # CPU arm_boost=1 #arm_freq=1500 # Display disable_overscan=1 # Display panel [gpio21=1] #dtoverlay=cutiepi-panel #dtoverlay=vc4-kms-dsi-7inch #dtoverlay=vc4-kms-dsi-lt070me05000 #dtoverlay=vc4-kms-dsi-lt070me05000-v2 [all] #dtoverlay=rpi-backlight # Fan #dtoverlay=gpio-fan #dtoverlay=i2c-fan #dtoverlay=rpi-poe #dtoverlay=rpi-poe-plus # Graphics acceleration disable_fw_kms_setup=1 [gpio21=1] dtoverlay=vc4-kms-v3d [all] # I2C dtparam=i2c_arm=on # I2S #dtparam=i2s=on # IR #dtoverlay=gpio-ir,gpio_pin=18 # Keys #dtoverlay=gpio-key,gpio=21,keycode=116,label="POWER" #dtoverlay=gpio-key,gpio=26,keycode=115,label="VOLUME_UP" #dtoverlay=gpio-key,gpio=20,keycode=114,label="VOLUME_DOWN" # RTC dtoverlay=i2c-rtc,ds3231 # Sensors #dtoverlay=android-i2c-sensor,mpu6050 # Serial console #enable_uart=1 # SPI dtparam=spi=on # Touchscreen #dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900 #dtoverlay=edt-ft5406 #dtoverlay=goodix #dtoverlay=rpi-ft5406 # USB dtoverlay=dwc2,dr_mode=peripheral [cm4] dtoverlay=dwc2,dr_mode=otg [all] include config_user.txt On Sun, Aug 25, 2024 at 2:44 PM Mario Marietto <marietto2...@gmail.com> wrote: > Appending the root device does not change the scenario : > > qemu-system-aarch64 \ > -smp 4 \ > -m 2048 \ > -cpu cortex-a72 \ > -machine virt \ > -serial stdio \ > -initrd > /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat > \ > -kernel > /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image > \ > -append "console=ttyAMA0,38400 drm.debug=0x0 rootwait rootdelay=5 > root=/dev/vdd1 rw" > > > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] > [ 0.000000] Linux version 6.6.36-g01aac93821d2-v8 (kleaf@build-host) > (Android (11368308, +pgo, +bolt, +lto, +mlgo, based on r510928) > clang version 18.0.0 ( > https://android.googlesource.com/toolchain/llvm-project > 477610d4d0d988e69dbc3fae4fe86bff3f07f2b5), LLD 18.0.0) # > 1 SMP PREEMPT Tue Jul 2 09:02:32 UTC 2024 > [ 0.000000] KASLR enabled > [ 0.000000] random: crng init done > [ 0.000000] Machine model: linux,dummy-virt > [ 0.000000] efi: UEFI not found. > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] > [ 0.000000] DMA32 empty > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] NoSplit zone start for each node > [ 0.000000] NoMerge zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000040000000-0x00000000bfffffff] > [ 0.000000] cma: Reserved 8 MiB at 0x00000000bd000000 on node -1 > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv1.1 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: Trusted OS migration not required > [ 0.000000] psci: SMC Calling Convention v1.0 > [ 0.000000] percpu: Embedded 31 pages/cpu s87016 r8192 d31768 u126976 > [ 0.000000] Detected PIPT I-cache on CPU0 > [ 0.000000] CPU features: detected: Spectre-v2 > [ 0.000000] CPU features: detected: Spectre-v3a > [ 0.000000] CPU features: detected: Spectre-v4 > [ 0.000000] CPU features: detected: Spectre-BHB > [ 0.000000] CPU features: kernel page table isolation forced ON by > KASLR > [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) > [ 0.000000] CPU features: detected: ARM erratum 1742098 > [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or > 1530923 > [ 0.000000] alternatives: applying boot alternatives > [ 0.000000] Kernel command line: console=ttyAMA0,38400 drm.debug=0x0 > rootwait rootdelay=5 root=/dev/vdd1 rw androidboot.serialno=100 > 00000abcd1234 androidboot.btmacaddr=11:22:33:44:55:66 > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes, linear) > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes, linear) > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 516096 > [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap > free:off > [ 0.000000] Memory: 1881596K/2097152K available (19328K kernel code, > 2374K rwdata, 7612K rodata, 1792K init, 1192K bss, 207364K rese > rved, 8192K cma-reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] ftrace: allocating 56269 entries in 220 pages > [ 0.000000] ftrace: allocated 220 pages with 5 groups > [ 0.000000] trace event string verifier disabled > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > [ 0.000000] rcu: RCU event tracing is enabled. > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to > nr_cpu_ids=4. > [ 0.000000] Trampoline variant of Tasks RCU enabled. > [ 0.000000] Rude variant of Tasks RCU enabled. > [ 0.000000] Tracing variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is > 25 jiffies. > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=4 > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > [ 0.000000] Root IRQ handler: gic_handle_irq > [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on > contention. > [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). > [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff > max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > [ 0.000069] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every > 4398046511096ns > [ 0.003628] kfence: initialized - using 2097152 bytes for 255 objects > at 0x(____ptrval____)-0x(____ptrval____) > [ 0.010906] Calibrating delay loop (skipped), value calculated using > timer frequency.. 125.00 BogoMIPS (lpj=250000) > [ 0.011082] pid_max: default: 32768 minimum: 301 > [ 0.013020] LSM: initializing lsm=capability,selinux,integrity > [ 0.013436] SELinux: Initializing. > [ 0.016921] Mount-cache hash table entries: 4096 (order: 3, 32768 > bytes, linear) > [ 0.016984] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 > bytes, linear) > [ 0.031469] cgroup: Disabling memory control group subsystem > [ 0.050059] cacheinfo: Unable to detect cache hierarchy for CPU 0 > [ 0.059978] RCU Tasks: Setting shift to 2 and lim to 1 > rcu_task_cb_adjust=1. > [ 0.060584] RCU Tasks Rude: Setting shift to 2 and lim to 1 > rcu_task_cb_adjust=1. > [ 0.060822] RCU Tasks Trace: Setting shift to 2 and lim to 1 > rcu_task_cb_adjust=1. > [ 0.062427] rcu: Hierarchical SRCU implementation. > [ 0.062463] rcu: Max phase no-delay instances is 1000. > [ 0.068568] EFI services will not be available. > [ 0.071086] smp: Bringing up secondary CPUs ... > [ 0.074801] Detected PIPT I-cache on CPU1 > [ 0.075909] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] > [ 0.081065] Detected PIPT I-cache on CPU2 > [ 0.081470] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] > [ 0.083873] Detected PIPT I-cache on CPU3 > [ 0.084168] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] > [ 0.084681] smp: Brought up 1 node, 4 CPUs > [ 0.084715] SMP: Total of 4 processors activated. > [ 0.084800] CPU features: detected: 32-bit EL0 Support > [ 0.084824] CPU features: detected: 32-bit EL1 Support > [ 0.084885] CPU features: detected: CRC32 instructions > [ 0.088191] CPU features: emulated: Privileged Access Never (PAN) using > TTBR0_EL1 switching > [ 0.088512] CPU: All CPU(s) started at EL1 > [ 0.088714] alternatives: applying system-wide alternatives > [ 0.113756] devtmpfs: initialized > [ 0.126262] Enabled cp15_barrier support > [ 0.126449] Enabled setend support > [ 0.127708] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.127840] futex hash table entries: 1024 (order: 4, 65536 bytes, > linear) > [ 0.131302] pinctrl core: initialized pinctrl subsystem > [ 0.138216] DMI not present or invalid. > [ 0.147664] NET: Registered PF_NETLINK/PF_ROUTE protocol family > [ 0.158502] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic > allocations > [ 0.158987] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for > atomic allocations > [ 0.159303] audit: initializing netlink subsys (disabled) > [ 0.161302] audit: type=2000 audit(0.148:1): state=initialized > audit_enabled=0 res=1 > [ 0.164412] thermal_sys: Registered thermal governor 'step_wise' > [ 0.164806] cpuidle: using governor menu > [ 0.165816] hw-breakpoint: found 6 breakpoint and 4 watchpoint > registers. > [ 0.166975] ASID allocator initialised with 32768 entries > [ 0.168385] Serial: AMBA PL011 UART driver > [ 0.196712] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, > base_baud = 0) is a PL011 rev1 > [ 0.198278] printk: console [ttyAMA0] enabled > [ 0.224278] Modules: 2G module region forced by > RANDOMIZE_MODULE_REGION_FULL > [ 0.224486] Modules: 0 pages in range for non-PLT usage > [ 0.224510] Modules: 516176 pages in range for PLT usage > [ 0.241442] iommu: Default domain type: Translated > [ 0.241679] iommu: DMA domain TLB invalidation policy: strict mode > [ 0.244200] SCSI subsystem initialized > [ 0.245459] usbcore: registered new interface driver usbfs > [ 0.245841] usbcore: registered new interface driver hub > [ 0.246154] usbcore: registered new device driver usb > [ 0.247257] mc: Linux media interface: v0.10 > [ 0.247617] videodev: Linux video capture interface: v2.00 > [ 0.248602] pps_core: LinuxPPS API ver. 1 registered > [ 0.248700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <giome...@linux.it> > [ 0.248967] PTP clock support registered > [ 0.251884] Advanced Linux Sound Architecture Driver Initialized. > [ 0.262663] Bluetooth: Core ver 2.22 > [ 0.262960] NET: Registered PF_BLUETOOTH protocol family > [ 0.263069] Bluetooth: HCI device and connection manager initialized > [ 0.263344] Bluetooth: HCI socket layer initialized > [ 0.263516] Bluetooth: L2CAP socket layer initialized > [ 0.263840] Bluetooth: SCO socket layer initialized > [ 0.266790] vgaarb: loaded > [ 0.268841] clocksource: Switched to clocksource arch_sys_counter > [ 0.272056] VFS: Disk quotas dquot_6.6.0 > [ 0.272284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.273060] FS-Cache: Loaded > [ 0.278526] CacheFiles: Loaded > [ 0.287007] NET: Registered PF_INET protocol family > [ 0.288390] IP idents hash table entries: 32768 (order: 6, 262144 > bytes, linear) > [ 0.297021] tcp_listen_portaddr_hash hash table entries: 1024 (order: > 2, 16384 bytes, linear) > [ 0.297273] Table-perturb hash table entries: 65536 (order: 6, 262144 > bytes, linear) > [ 0.297485] TCP established hash table entries: 16384 (order: 5, 131072 > bytes, linear) > [ 0.298036] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, > linear) > [ 0.298873] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.301283] MPTCP token hash table entries: 2048 (order: 3, 49152 > bytes, linear) > [ 0.301759] UDP hash table entries: 1024 (order: 3, 32768 bytes, > linear) > [ 0.302186] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, > linear) > [ 0.304009] NET: Registered PF_UNIX/PF_LOCAL protocol family > [ 0.306868] PCI: CLS 0 bytes, default 64 > [ 0.312145] Trying to unpack rootfs image as initramfs... > [ 0.312808] kvm [1]: HYP mode not available > [ 0.318856] rootfs image is not initramfs (invalid magic at start of > compressed archive); looks like an initrd > [ 0.335544] Initialise system trusted keyrings > [ 0.338430] workingset: timestamp_bits=46 max_order=19 bucket_order=0 > [ 0.339134] zbud: loaded > [ 0.347742] Key type cifs.idmap registered > [ 0.348673] fuse: init (API version 7.39) > [ 0.386722] Key type asymmetric registered > [ 0.386992] Asymmetric key parser 'x509' registered > [ 0.387460] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 244) > [ 0.388796] io scheduler mq-deadline registered > [ 0.388954] io scheduler kyber registered > [ 0.389319] io scheduler bfq registered > [ 0.406358] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 > mem_size:0x00000000(0 MiB) > [ 0.476330] brd: module loaded > [ 0.508286] loop: module loaded > [ 0.512092] Loading iSCSI transport class v2.0-870. > [ 0.522449] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com > for information. > [ 0.522729] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld < > ja...@zx2c4.com>. All Rights Reserved. > [ 0.538429] tun: Universal TUN/TAP device driver, 1.6 > [ 0.541953] usbcore: registered new interface driver brcmfmac > [ 0.542290] usbcore: registered new device driver r8152-cfgselector > [ 0.542675] usbcore: registered new interface driver r8152 > [ 0.542971] usbcore: registered new interface driver lan78xx > [ 0.543488] usbcore: registered new interface driver asix > [ 0.543810] usbcore: registered new interface driver ax88179_178a > [ 0.544134] usbcore: registered new interface driver cdc_ether > [ 0.544609] usbcore: registered new interface driver smsc95xx > [ 0.544909] usbcore: registered new interface driver net1080 > [ 0.545240] usbcore: registered new interface driver cdc_subset > [ 0.545596] usbcore: registered new interface driver zaurus > [ 0.545896] usbcore: registered new interface driver cdc_ncm > [ 0.546192] usbcore: registered new interface driver r8153_ecm > [ 0.547442] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) > [ 0.550591] usbcore: registered new interface driver cdc_acm > [ 0.550756] cdc_acm: USB Abstract Control Model driver for USB modems > and ISDN adapters > [ 0.551948] usbcore: registered new interface driver uas > [ 0.552352] usbcore: registered new interface driver usb-storage > [ 0.566050] usbcore: registered new interface driver cp210x > [ 0.566791] usbserial: USB Serial support registered for cp210x > [ 0.567318] usbcore: registered new interface driver pl2303 > [ 0.567653] usbserial: USB Serial support registered for pl2303 > [ 0.573531] mousedev: PS/2 mouse device common for all mice > [ 0.573930] usbcore: registered new interface driver xpad > [ 0.574228] usbcore: registered new interface driver usb_acecad > [ 0.574588] usbcore: registered new interface driver aiptek > [ 0.574937] usbcore: registered new interface driver hanwang > [ 0.575292] usbcore: registered new interface driver kbtab > [ 0.577388] usbcore: registered new interface driver usbtouchscreen > [ 0.580179] i2c_dev: i2c /dev entries driver > [ 0.584010] ir_imon_decoder: IR iMON protocol handler initialized > [ 0.584179] IR JVC protocol handler initialized > [ 0.584296] IR MCE Keyboard/mouse protocol handler initialized > [ 0.584435] IR NEC protocol handler initialized > [ 0.584734] IR RC5(x/sz) protocol handler initialized > [ 0.584863] IR RC6 protocol handler initialized > [ 0.584991] IR RCMM protocol handler initialized > [ 0.585111] IR SANYO protocol handler initialized > [ 0.585226] IR Sharp protocol handler initialized > [ 0.585358] IR Sony protocol handler initialized > [ 0.585477] IR XMP protocol handler initialized > [ 0.586421] usbcore: registered new interface driver uvcvideo > [ 0.589015] device-mapper: uevent: version 1.0.3 > [ 0.590448] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) > initialised: dm-de...@redhat.com > [ 0.591924] Bluetooth: HCI UART driver ver 2.3 > [ 0.592106] Bluetooth: HCI UART protocol H4 registered > [ 0.592885] Bluetooth: HCI UART protocol Broadcom registered > [ 0.594293] sdhci: Secure Digital Host Controller Interface driver > [ 0.594442] sdhci: Copyright(c) Pierre Ossman > [ 0.594948] sdhci-pltfm: SDHCI platform and OF driver helper > [ 0.596987] ledtrig-cpu: registered to indicate activity on CPUs > [ 0.599350] hid: raw HID events driver (C) Jiri Kosina > [ 0.612270] usbcore: registered new interface driver usbhid > [ 0.612441] usbhid: USB HID core driver > [ 0.615743] ashmem: initialized > [ 0.617297] SPI driver st-accel-spi has no spi_device_id for > st,lis302dl-spi > [ 0.617473] SPI driver st-accel-spi has no spi_device_id for > st,lis3lv02dl-accel > [ 0.617626] SPI driver st-accel-spi has no spi_device_id for > st,lis3dh-accel > [ 0.617769] SPI driver st-accel-spi has no spi_device_id for > st,lsm330d-accel > [ 0.617919] SPI driver st-accel-spi has no spi_device_id for > st,lsm330dl-accel > [ 0.618062] SPI driver st-accel-spi has no spi_device_id for > st,lsm330dlc-accel > [ 0.618206] SPI driver st-accel-spi has no spi_device_id for > st,lis331dlh-accel > [ 0.618357] SPI driver st-accel-spi has no spi_device_id for > st,lsm330-accel > [ 0.618493] SPI driver st-accel-spi has no spi_device_id for > st,lsm303agr-accel > [ 0.618638] SPI driver st-accel-spi has no spi_device_id for > st,lis2dh12-accel > [ 0.618775] SPI driver st-accel-spi has no spi_device_id for > st,lng2dm-accel > [ 0.618911] SPI driver st-accel-spi has no spi_device_id for > st,h3lis331dl-accel > [ 0.619056] SPI driver st-accel-spi has no spi_device_id for > st,lis331dl-accel > [ 0.619209] SPI driver st-accel-spi has no spi_device_id for > st,lsm303c-accel > [ 0.620207] SPI driver st-magn-spi has no spi_device_id for > st,lis3mdl-magn > [ 0.620355] SPI driver st-magn-spi has no spi_device_id for > st,lsm303agr-magn > [ 0.620510] SPI driver st-magn-spi has no spi_device_id for > st,lsm9ds1-magn > [ 0.620768] SPI driver st-magn-spi has no spi_device_id for > st,lsm303c-magn > [ 0.626130] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 > counters available > [ 0.630320] usbcore: registered new interface driver snd-usb-audio > [ 0.638439] Mirror/redirect action on > [ 0.639343] netem: version 1.3 > [ 0.639435] u32 classifier > [ 0.639508] input device check on > [ 0.639602] Actions configured > [ 0.648469] xt_time: kernel timezone is -0000 > [ 0.649096] gre: GRE over IPv4 demultiplexor driver > [ 0.649255] IPv4 over IPsec tunneling driver > [ 0.654843] Initializing XFRM netlink socket > [ 0.655213] IPsec XFRM device driver > [ 0.676037] NET: Registered PF_INET6 protocol family > [ 0.687646] Segment Routing with IPv6 > [ 0.687964] In-situ OAM (IOAM) with IPv6 > [ 0.689074] mip6: Mobile IPv6 > [ 0.693823] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [ 0.699298] NET: Registered PF_PACKET protocol family > [ 0.699567] NET: Registered PF_KEY protocol family > [ 0.699819] Key type dns_resolver registered > [ 0.798005] Freeing initrd memory: 131072K > [ 0.806166] registered taskstats version 1 > [ 0.807819] Loading compiled-in X.509 certificates > [ 0.834497] Key type .fscrypt registered > [ 0.834641] Key type fscrypt-provisioning registered > [ 0.841634] of_cfs_init > [ 0.842079] of_cfs_init: OK > [ 0.845830] cfg80211: Loading compiled-in X.509 certificates for > regulatory database > [ 0.876283] Loaded X.509 cert 'b...@debian.org: > 577e021cb980e0e820821ba7b54b4961b8b4fadf' > [ 0.877632] Loaded X.509 cert 'romain.per...@gmail.com: > 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' > [ 0.878441] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' > [ 0.879187] Loaded X.509 cert 'wens: > 61c038651aabdcf94bd0ac7ff06c7248db18c600' > [ 0.885017] clk: Disabling unused clocks > [ 0.885499] ALSA device list: > [ 0.885646] No soundcards found. > [ 0.894059] uart-pl011 9000000.pl011: no DMA platform data > [ 0.895672] Waiting 5 sec before mounting root device... > [ 6.132758] RAMDISK: Couldn't find valid RAM disk image starting at 0. > [ 6.133865] Waiting for root device /dev/vdd1... > [ 10.994096] platform gpio-keys: deferred probe pending > > > > On Sun, Aug 25, 2024 at 2:30 PM Mario Marietto <marietto2...@gmail.com> > wrote: > >> When I unpack this file : >> >> lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv.img >> >> I get these files : >> >> 0.fat >> 1.img >> 2.img >> 3.img >> >> So,I assume that : >> >> 0.fat is : initrd >> 1.img is : system-rw.img >> 2.img is : vendor-rw.img >> 3.img is : userdata.img >> >> If I use 0.fat as initrd,like this : >> >> -initrd >> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat >> >> I get this message : >> >> rootfs image is not initramfs (invalid magic at start of compressed >> archive); looks like an initrd >> >> it looks like an initrd : right,it's true : it is initrd. (for this >> reason I've assumed that 0.fat is initrd... >> >> >> On Sun, Aug 25, 2024 at 1:26 PM Peter Maydell <peter.mayd...@linaro.org> >> wrote: >> >>> On Sun, 25 Aug 2024 at 11:45, Mario Marietto <marietto2...@gmail.com> >>> wrote: >>> > >>> > Please look at this example : >>> > >>> > qemu-system-aarch64 \ >>> > -smp 4 \ >>> > -m 2048 \ >>> > -cpu cortex-a72 \ >>> > -machine virt \ >>> > -serial stdio \ >>> > -kernel >>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image >>> \ >>> >>> This (assuming it's the complete command line your script is >>> running) doesn't pass any arguments telling QEMU to provide a >>> root disk, and it doesn't pass any arguments to the kernel >>> telling it what root disk to use... >>> >>> > [ 0.000000] Kernel command line: console=ttyAMA0,115200 >>> kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait >>> androidboot.serialno=10000000abcd1234 >>> androidboot.btmacaddr=11:22:33:44:55:66 >>> >>> ...so the kernel defaults to "/dev/mmcblk0p2" as its root disk because >>> it's using the command line argument that was compiled into it... >>> >>> > [ 0.658240] Waiting for root device /dev/mmcblk0p2... >>> >>> ...and then it's hanging around forever waiting for that. >>> >>> You need to: >>> (1) pass QEMU arguments telling it to provide a root fs >>> (2) pass the kernel arguments telling it to look for the >>> root fs in the place where QEMU is providing it >>> >>> Your other command line looks more on the right lines: >>> >>> -kernel >>> >>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/boot/Image >>> \ >>> -initrd >>> >>> /mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/0.fat >>> \ >>> -drive >>> index=0,if=none,id=system,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/1.img >>> \ >>> -device virtio-blk-pci,drive=system \ >>> -drive >>> index=1,if=none,id=vendor,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/2.img >>> \ >>> -device virtio-blk-pci,drive=vendor \ >>> -drive >>> index=2,if=none,id=userdata,file=/mnt/zroot2/zroot2/OS/Linux/lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv/3.img >>> \ >>> -device virtio-blk-pci,drive=userdata \ >>> >>> though I wonder if the kernel really expects a >>> FAT file for the initrd, given it complains: >>> >>> [ 0.344033] Trying to unpack rootfs image as initramfs... >>> [ 0.344947] rootfs image is not initramfs (invalid magic at start >>> of compressed archive); looks like an initrd >>> >>> and then later >>> >>> [ 5.905329] RAMDISK: Couldn't find valid RAM disk image starting at 0. >>> >>> I think if I were you I'd start by figuring out what's going on >>> with the initrd. >>> >>> thanks >>> -- PMM >>> >> >> >> -- >> Mario. >> > > > -- > Mario. > -- Mario.
