Hi Tony, I am using SMSQ/E v2.85 on the Supergold and Aurora with Superhermes drivers v1.05
I will try and update SMSQ/E to v2.91, I am told is a working version. Are there any better IPC extensions available for Superhermes. Hopefully the situation can be resolved without a device driver rewrite. Derek ----- Original Message ----- From: "Tony Firshman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 02, 2002 11:44 AM Subject: Re: [ql-developers] Q60 issues > On Sat, 2 Feb 2002 at 11:04:19, you wrote: > (ref: <004801c1abd9$5d5e5240$8e5187d9@network>) > > >Hi Tony, > > > >The problem with the Superhermes SER3 is that, when the sernet program is > >loaded into the system. Sernet initialises the serial port with the > >parameters set in the config blocks. > > > >I have tried all the variations detailed in the Superhermes manual to all > >flow through the SER3 port. But Sernet just comes back with an error message > >saying there is a problem with the serial port. > > > >If SER1 or SER2 is used on the Aurora, everything is fine. > > > >I also tried the serial port redirection, which does not work as well. I > >anyone can get Superhermes SER3 port to work, then great. > > > >My guess is that the device driver is not a standard device. In that SMSQ/E > >does not recognise it like SER1 and SER2. Maybe just a re-write of the > >driver ocde is required. > I would think so. It clearly bypasses the normal ser1/2 drivers. > > Pity. Maybe Jochen is in touch with Berndt, and could persuade him to > offer a ser3 option. > -- > QBBS (QL fido BBS 2:257/67) +44(0)1442-828255 > mailto:[EMAIL PROTECTED] http://www.firshman.demon.co.uk > Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 > TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG >
