Hi, Sernet on the Q40/Q60 does work as I have "serneted??" all these machines, in addition I have have sernet v2.2 runnning between the following :
Machine Baud Rate Q40 - QXL 38400 Q40 - Aurora Ser1/2 9600 - This was the only speed I could get reliable data flow. Q40 - Aurora Superhermes Does not work, can not get sernet to recognise the Superhermes SER3 port Q40 - Atari ST Emulator 38400 Q40 - Q40 115200 Q40 - QPC2 115200 Q40 - UQLX Can not get it to work, but since UQLX can write to a SMSQ/E partition. Not worth it. The Q60 uses the same SMSQ/E as the Q40, so it should work OK. But you never know. The serial transfer bewteen Q40-Q40 is faster than Q40-QPC2 do no know why... maybe the cache that the 68060 uses. UQLX, I cannot get sernet to work. But I would rather have a 10-100Mps TCP/IP connection to the Q60/40... than a sloooow serial connection. The cable I used was a standard null modem lead from Maplin Electronics in the UK. No need to mess about sodering wires. I have made a 4 port serial cable for a sernet hub, maybe make a little box for it. But I am unsure whether to use 9 pin or 25 pin connectors. Derek
