On Sat, 3 Feb 2001 at 18:00:43, Bill Waugh <[EMAIL PROTECTED]>
wrote:
(Ref: <[EMAIL PROTECTED]>)
>Well now, I recall when I installed the i/o card there was a problem (
>turned out to be not connecting to motherboard) and I checked all the
>jumpers, are there not about forty of them?
Yes- that is a typical problem. Try mounting the Q40 board a bit higher
- ie bigger support 'nuts' (I wonder what the right word is) We also
found that filing the edges of the board where they fit in the ISA slot
helped make them insert more easily. Not the long edge, but the short
edge and the location cutout. This is not as dangerous as it sounds, as
there is no copper anywhere near.
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
mailto:[EMAIL PROTECTED] http://www.firshman.demon.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
