Hi, Please try the following. Edit /quadstorvtl/etc/quadstor.conf (create the file if its not present) and add the following lines CmdDebug=1 ReservationDebug=1 AccessDebug=1
Then run the command /quadstorvtl/bin/vtconfig --reload Please retry the steps, post the time of VARY OFF, VARY ON and the CPD8EB4 message(as you have done now) and send the diagnostic logs (HTML UI -> System Page -> Run Diagnostics -> Submit) If sending the diagnostic logs here is a problem, please send it to vtlsupp...@quadstor.com Please check if the system time of the LPAR and the VTL are in sync before the test On Thu, Jun 15, 2023 at 9:15 PM Virgule59 <virgile.va...@gmail.com> wrote: > Hi, > > I have a may the same problem, but not on a restore. It''s on a new > installation of quadstore, i'v created a tape library IBM TS3100 on > Quadstor. When i try to vary off the library no problem, when i try to vary > on the tape of the library after vary off mlb device, i've got the > message, that the device is in use by another LPAR, but i've just one LPAR. > > TAPMLB06 EN FONCTION > TAP08 OPERATIONNELLE NON PROTEGEE > TAP09 OPERATIONNELLE NON PROTEGEE > > > ID message . . . . . . : CPD8EB4 > > Date d'envoi . . . . . : 15/06/23 Heure d'envoi . . . . : > 16:09:25 > > > Message . . . . : La mise en fonction de l'unité TAP08 a échoué. > > > > Cause . . . . . : Cette unité de bande est attribuée à un autre système. > > Que faire . . . : Attendez que l'autre système ait fini de l'utiliser, > puis > renouvelez votre demande. > > > Unité TAPMLB06 mise hors fonction. > La mise en fonction de l'unité TAP08 a échoué. > Commande de changement d'état non exécutée. > > I've trie on V7R4 and V7R2 with latest PTF. Seems that QUANTUM DRIVE are > correctly work wih BRMS but can't backup on VTL cardridge... > > > Thank You > > Le mardi 6 juin 2023 à 10:09:31 UTC+2, quadstor a écrit : > >> Hi, >> >> Have you checked if the drive status is UNPROTECTED ? Please review >> https://www.ibm.com/docs/en/i/7.2?topic=libraries-sharing-tape-library-resources >> >> What is the output of WRKDEVSTS ? >> Please attach the diagnostic logs from the VTL system and also mention >> the time of the device in use error message >> >> >> >> On Mon, Jun 5, 2023 at 6:47 PM roopa shree <rupa...@gmail.com> wrote: >> >>> I am trying to do a full restore of the IBM i using the back up from >>> the VTL >>> >>> 1. Launched a new LPAR using IBM provided images on the IBM cloud >>> 2. Tried to attach the same tapelibrary of the system which we are >>> trying to restore >>> 3. Varied off the tape library on the main LPAR and tried to configure >>> same library on the new LPAR but was getting error that the device is in >>> use >>> 4. Tried to configure a new tape library and attach the vcatridges but >>> still was unable to >>> >>> So is there any where I am going wrong or is there otherway to do a >>> full system restore >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "QUADStor VTL" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to quadstor-vtl...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/quadstor-vtl/48bab5c1-5fee-48d4-abd6-7fa85ba3c7cfn%40googlegroups.com >>> <https://groups.google.com/d/msgid/quadstor-vtl/48bab5c1-5fee-48d4-abd6-7fa85ba3c7cfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to quadstor-vtl+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quadstor-vtl/d44e94e9-c2f1-49b3-9e97-07e1ef80b073n%40googlegroups.com > <https://groups.google.com/d/msgid/quadstor-vtl/d44e94e9-c2f1-49b3-9e97-07e1ef80b073n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to quadstor-vtl+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt6cDMAEYRN_WdU4U1Q6wmBL-7Jh%3DNet60BUJi%2Bq-g%3D7tg%40mail.gmail.com.
