Hello, Sorry, I only saw your message after changing the OS. But after changing the OS and retesting I was confronted with the same error.
But after forcing the allocation of the media library to the partition, then deallocating this same media library from the partition, I was able to make the drive and the media library work via BRMS. I was able to carry out several backup tests with success, so a full restore backup with BRMS. The only problem I encountered during restoration was that I couldn't boot the blank partition from the tape, the drive was detected but not booted. But last week IBM released a PTF, and I think I'm in the same situation: to be retested. https://www.ibm.com/support/pages/node/7015245?myns=swgother&mynp=OCSWG60&mync=E&cm_sp=swgother-_-OCSWG60-_-E This may be the problem encountered by roopa shree. Best regards Le jeu. 6 juil. 2023 à 16:04, QUADStor VTL Support <vtlsupp...@quadstor.com> a écrit : > Hi, > > A different OS distribution will not help. > > Please try the following. Edit /quadstorvtl/etc/quadstor.conf and add the > following line > CmdDebug=1 > > Then run the command > /quadstorvtl/bin/vtconfig --reload > > Please then try to simulate the error and note the time of the vary off > and vary on and send the diagnostic logs once again. > > > On Thu, Jul 6, 2023 at 7:33 PM Virgule59 <virgile.va...@gmail.com> wrote: > >> Hi, >> >> Try with last version but same trouble. :( . >> >> I will try on different OS with this version may. thank you >> >> Best Regard >> >> >> Le mardi 27 juin 2023 à 15:44:12 UTC+2, quadstor a écrit : >> >>> Hi, >>> >>> For the moment please try with 3.0.76.1 from >>> https://quadstor.com/vtl-extended-edition-downloads.html >>> Before uninstalling change the HBA mode to target from Dual (HTML UI -> >>> Access Management) >>> >>> dpkg -r quadstor-vtl-ext >>> dpkg -i <new package> >>> reboot >>> >>> >>> On Tue, Jun 27, 2023 at 6:29 PM Virgule59 <virgil...@gmail.com> wrote: >>> >>>> Hi, >>>> >>>> Try almost everything, different library, different tape media, 3 LPAR >>>> with different PTF Level, and one LPAR with V7R4 and last up to date PTF >>>> same error. I know that it's not related to ptf because i'use physical IBM >>>> TS4200 on this LPAR with no problem. >>>> >>>> up to date PTF : >>>> >>>> SF99741 level 8 ALL PTF GROUPS EXCEPT CUMULATIVE PTF >>>> PACKAGE & MQ >>>> SF99740 level 23117 CUMULATIVE PTF PACKAGE C3117740 >>>> >>>> >>>> Before i try on my IBM i Lpar, i try on Windows server and iscsi >>>> connexion, work fine with veaam combination, is-it possible that QUADSTOR >>>> have a trace of this connection and now failed on my IBM i. >>>> >>>> May be a fresh install ? >>>> >>>> Best Regard >>>> Le mercredi 21 juin 2023 à 21:27:16 UTC+2, quadstor a écrit : >>>> >>>>> Hi, >>>>> >>>>> The host removes its persistent reservation registration but then send >>>>> a reservation later without registration again >>>>> >>>>> Jun 16 14:31:30 svquadstor vtlcore: >>>>> persistent_reservation_handle_register:437 tdevice 2 2 is_reserved 0 >>>>> reservation i_prt 0 t_prt 0 persistent_key 0 type 0 generation 0 register >>>>> by i_prt c050760b8a410024 t_prt 21000024ff5505e7 prev_key 0 >>>>> service_action_key 0 ==> Host registration remove here >>>>> >>>>> Jun 16 14:31:30 svquadstor vtlcore: >>>>> persistent_reservation_handle_reserve:603 tdevice 2 2 is_reserved 0 >>>>> reservation i_prt 0 t_prt 0 persistent_key 0 type 0 generation 0 reserve >>>>> by >>>>> i_prt c050760b8a410024 t_prt 21000024ff5505e7 key 0 ==> Host tries to >>>>> reserve the device but there is no active registration >>>>> >>>>> Jun 16 14:31:30 svquadstor vtlcore: >>>>> persistent_reservation_handle_reserve:607 2 2 initiator not registered for >>>>> key 0 retval 0 ==> We return an erro because the initiator/host is not >>>>> registered. >>>>> >>>>> This might be PTF related, are all PTFs upto date ? >>>>> >>>>> >>>>> On Fri, Jun 16, 2023 at 6:23 PM Virgule59 <virgil...@gmail.com> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> Add the 3 lines in configuration file >>>>>> >>>>>> DisableUncompV2=1 >>>>>> EmulateHH=1 >>>>>> CmdDebug=1 >>>>>> ReservationDebug=1 >>>>>> AccessDebug=1 >>>>>> >>>>>> reload quadstor service : >>>>>> >>>>>> here the Two LTO created by quadstor >>>>>> >>>>>> Opt Ressource Type-Modèle Etat Texte >>>>>> TAPMLB04 3573-020 Opérationnel Bandothèque >>>>>> TAPMLB06 3573-020 Opérationnel Bandothèque >>>>>> >>>>>> TAPMLB04 EN FONCTION >>>>>> TAP05 OPERATIONNELLE NON PROTEGEE >>>>>> TAPMLB05 HORS FONCTION >>>>>> TAPMLB06 EN FONCTION >>>>>> TAP08 OPERATIONNELLE NON PROTEGEE >>>>>> >>>>>> Disabled TAPMLBD DEVICE and enable drive TAP08 drive: >>>>>> >>>>>> Complément d'informations sur message >>>>>> >>>>>> >>>>>> >>>>>> ID message . . . . . . : CPD8EB4 >>>>>> >>>>>> Date d'envoi . . . . . : 16/06/23 Heure d'envoi . . . . : >>>>>> 14:31:30 >>>>>> >>>>>> >>>>>> Message . . . . : La mise en fonction de l'unité TAP08 a échoué. >>>>>> >>>>>> >>>>>> >>>>>> Cause . . . . . : Cette unité de bande est attribuée à un autre >>>>>> système. >>>>>> Que faire . . . : Attendez que l'autre système ait fini de >>>>>> l'utiliser, puis >>>>>> renouvelez votre demande. >>>>>> >>>>>> >>>>>> Time switch Vary off vary on 14h30 >>>>>> >>>>>> L'état d'une ressource de l'unité TAPMLB06 a été modifié. => >>>>>> Time 14h26 >>>>>> Unité TAPMLB06 mise en fonction. >>>>>> wrkcfgsts *dev tapmlb* >>>>>> Unité TAPMLB06 mise hors fonction. >>>>>> wrkcfgsts *dev tap* >>>>>> La mise en fonction de l'unité TAP08 a échoué. >>>>>> Commande de changement d'état non exécutée. => 14h31 >>>>>> >>>>>> >>>>>> >>>>>> Best regard >>>>>> >>>>>> >>>>>> >>>>>> Le jeudi 15 juin 2023 à 18:04:49 UTC+2, quadstor a écrit : >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Please try the following. Edit /quadstorvtl/etc/quadstor.conf >>>>>>> (create the file if its not present) and add the following lines >>>>>>> CmdDebug=1 >>>>>>> ReservationDebug=1 >>>>>>> AccessDebug=1 >>>>>>> >>>>>>> Then run the command >>>>>>> /quadstorvtl/bin/vtconfig --reload >>>>>>> >>>>>>> Please retry the steps, post the time of VARY OFF, VARY ON and the >>>>>>> CPD8EB4 message(as you have done now) and send the diagnostic logs >>>>>>> (HTML UI >>>>>>> -> System Page -> Run Diagnostics -> Submit) If sending the diagnostic >>>>>>> logs >>>>>>> here is a problem, please send it to vtlsu...@quadstor.com >>>>>>> >>>>>>> Please check if the system time of the LPAR and the VTL are in sync >>>>>>> before the test >>>>>>> >>>>>>> >>>>>>> On Thu, Jun 15, 2023 at 9:15 PM Virgule59 <virgil...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I have a may the same problem, but not on a restore. It''s on a new >>>>>>>> installation of quadstore, i'v created a tape library IBM TS3100 on >>>>>>>> Quadstor. When i try to vary off the library no problem, when i try to >>>>>>>> vary >>>>>>>> on the tape of the library after vary off mlb device, i've got the >>>>>>>> message, that the device is in use by another LPAR, but i've just one >>>>>>>> LPAR. >>>>>>>> >>>>>>>> TAPMLB06 EN FONCTION >>>>>>>> TAP08 OPERATIONNELLE NON PROTEGEE >>>>>>>> TAP09 OPERATIONNELLE NON PROTEGEE >>>>>>>> >>>>>>>> >>>>>>>> ID message . . . . . . : CPD8EB4 >>>>>>>> >>>>>>>> Date d'envoi . . . . . : 15/06/23 Heure d'envoi . . . . : >>>>>>>> 16:09:25 >>>>>>>> >>>>>>>> >>>>>>>> Message . . . . : La mise en fonction de l'unité TAP08 a échoué. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Cause . . . . . : Cette unité de bande est attribuée à un autre >>>>>>>> système. >>>>>>>> Que faire . . . : Attendez que l'autre système ait fini de >>>>>>>> l'utiliser, puis >>>>>>>> renouvelez votre demande. >>>>>>>> >>>>>>>> >>>>>>>> Unité TAPMLB06 mise hors fonction. >>>>>>>> La mise en fonction de l'unité TAP08 a échoué. >>>>>>>> Commande de changement d'état non exécutée. >>>>>>>> >>>>>>>> I've trie on V7R4 and V7R2 with latest PTF. Seems that QUANTUM >>>>>>>> DRIVE are correctly work wih BRMS but can't backup on VTL cardridge... >>>>>>>> >>>>>>>> >>>>>>>> Thank You >>>>>>>> >>>>>>>> Le mardi 6 juin 2023 à 10:09:31 UTC+2, quadstor a écrit : >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> Have you checked if the drive status is UNPROTECTED ? Please >>>>>>>>> review >>>>>>>>> https://www.ibm.com/docs/en/i/7.2?topic=libraries-sharing-tape-library-resources >>>>>>>>> >>>>>>>>> What is the output of WRKDEVSTS ? >>>>>>>>> Please attach the diagnostic logs from the VTL system and also >>>>>>>>> mention the time of the device in use error message >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Jun 5, 2023 at 6:47 PM roopa shree <rupa...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> I am trying to do a full restore of the IBM i using the back up >>>>>>>>>> from the VTL >>>>>>>>>> >>>>>>>>>> 1. Launched a new LPAR using IBM provided images on the IBM cloud >>>>>>>>>> 2. Tried to attach the same tapelibrary of the system which we >>>>>>>>>> are trying to restore >>>>>>>>>> 3. Varied off the tape library on the main LPAR and tried to >>>>>>>>>> configure same library on the new LPAR but was getting error that the >>>>>>>>>> device is in use >>>>>>>>>> 4. Tried to configure a new tape library and attach the >>>>>>>>>> vcatridges but still was unable to >>>>>>>>>> >>>>>>>>>> So is there any where I am going wrong or is there otherway to >>>>>>>>>> do a full system restore >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "QUADStor VTL" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to quadstor-vtl...@googlegroups.com. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/quadstor-vtl/48bab5c1-5fee-48d4-abd6-7fa85ba3c7cfn%40googlegroups.com >>>>>>>>>> <https://groups.google.com/d/msgid/quadstor-vtl/48bab5c1-5fee-48d4-abd6-7fa85ba3c7cfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "QUADStor VTL" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to quadstor-vtl...@googlegroups.com. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/quadstor-vtl/d44e94e9-c2f1-49b3-9e97-07e1ef80b073n%40googlegroups.com >>>>>>>> <https://groups.google.com/d/msgid/quadstor-vtl/d44e94e9-c2f1-49b3-9e97-07e1ef80b073n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "QUADStor VTL" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to quadstor-vtl...@googlegroups.com. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/quadstor-vtl/314cda12-590e-4b0d-8503-dd4168867844n%40googlegroups.com >>>>>> <https://groups.google.com/d/msgid/quadstor-vtl/314cda12-590e-4b0d-8503-dd4168867844n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "QUADStor VTL" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to quadstor-vtl...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/quadstor-vtl/6fb6ea4a-4a42-439d-92c5-085006f36081n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/quadstor-vtl/6fb6ea4a-4a42-439d-92c5-085006f36081n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "QUADStor VTL" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to quadstor-vtl+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/quadstor-vtl/d25aadd1-7e6e-4d3c-ac0b-96d38ddd4188n%40googlegroups.com >> <https://groups.google.com/d/msgid/quadstor-vtl/d25aadd1-7e6e-4d3c-ac0b-96d38ddd4188n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "QUADStor VTL" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/quadstor-vtl/1f6Tt3-9Oys/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > quadstor-vtl+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt6oZvsAedNUXGL9CSCySqg0F7nmU2EJ2cwN3yhcMYS9Zw%40mail.gmail.com > <https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt6oZvsAedNUXGL9CSCySqg0F7nmU2EJ2cwN3yhcMYS9Zw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to quadstor-vtl+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quadstor-vtl/CALeRNe6TXCBTabGcghUc_%2Bw9g9yEAjCXm88kV32_4Hh7YhsDZg%40mail.gmail.com.
