Thanks Paul, I am going to change the clutch while the cars in bits do you know which one I need?.I am having difficulty matching to current one as there is no part no on the coverplate. Regards Brian.
On 13 Aug, 17:00, Paul F <[email protected]> wrote: > I have the 1.8 silver top zetec and as i remeber from the build i used > the engine mounts from the donnor which was a CHV 1.8 sierra. I did > replace with new the gear box mount as that seemed very soft. Gearbox > mount came from Quantum, but is a standard type 9 sierra mount as i > compared it to the original. > > Regards > Paul > > On 12 Aug, 12:42, xtreme brian <[email protected]> wrote: > > > Hi All, I just wondering what engine mounts the rest you "xtremists" > > with zetec engines are using as mine seem far to soft with the > > bellhousing contacting the transmission tunnel at the slightest bump > > in the road.I have been onto Xtreme and they sent me some mounts which > > were nowhere near tall enough. Regards Brian, > > ' > > , -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
