On Monday, April 17, 2017 at 9:53:36 PM UTC+2, babel wrote: > On Monday, April 17, 2017 at 9:38:26 PM UTC+2, Mark Elston wrote: > > I tried searching on this platform and qubes and haven't found anyone yet > > who has posted anything so here goes. I tried to install 3.2 on the Intel > > Skull Canyon Skylake NUC with Iris Pro Gfx. Tried UEFI mode and it seems > > to install fine but when I reboot it says "No bootable.." on startup. If I > > try to install in Legacy Mode it seems unable to start graphical installer > > and goes into a text-only mode. So finally I took a working install from a > > small/regular NUC that has been working fine, and when it boots it seems to > > go into text mode as well. I'm guessing maybe a gfx driver issue, but not > > sure if there is an easy way to update/fix. Any ideas? > > > > Thanks, > > Mark > > > You are following the guide written at the Qubes website here... > https://www.qubes-os.org/doc/uefi-troubleshooting/ > Which is not very easy to follow.. > > Your problem is either the first or the third (I did not really understand > which mine was either, so I followed both). > > 1) reinstall qubes, and at the end of the install, follow # 4, 5, 11, 12, > etc. on the first "problem". > > 2) On reboot, boot into a live cd of some sort (anything where you can get a > terminal, I used Ubuntu because it's easy on the eyes). You are now trying > to fix the third problem on the "troubleshooting" page. > When I tried to copy the /boot/efi/EFI..., I got an fstab error. Because the > drive isn't mounted. I ran.. > "" > sudo umount /dev/YourQubesDrive > mkdir /tmp/MyDrive > sudo mount -o rw /dev/YourQubesDrive /tmp/MyDrive > """ > where YourQubesDrive is the drive you have just installed qubes on. I used > gparted to make sure that it was the right one, but you can look where you're > installing qubes as you're installing it or there is probably some linux > command to do so. > I got that info from.. > https://askubuntu.com/questions/794468/mount-cant-find-dev-sdb1-in-etc-fstab-or-etc-mtab > > Then you can copy the stuff over from within the folder you made. reboot > after. > cd /tmp/MyDrive
And I realized you can just do the second step while you're doing the first one.. Hey, it's a learning process. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b3406ac4-f86c-4dff-9baa-28799448973f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
