Ah I just tried palisade driver and I am getting
Palisade(1) HW_poll: ioctl(fd, SET, RTS_on): Inappropriate I/O control operation
C:\Documents and Settings\Administrator>ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
GPS_PALISADE(1) .GPS. 0 l - 16 0 0.000 0.000 0.000
-ntp 130.95.179.80 2 s 5 64 77 0.363 -2.220 0.399
+ntp.melbourne. .ATOM. 1 u 27 64 77 37.843 -0.143 2.923
+ntp.hobart. 210.9.192.50 2 u 34 64 77 51.696 -0.520 2.024
*ntp.brisbane. .ATOM. 1 u 30 64 77 29.232 0.032 0.691
Any ideas?
server 127.127.29.1 minpoll 4 maxpoll 4
windows nt ntpd - NTP daemon program - Ver. 4.2.7p253
Crikey I better not touch anything else today!
-----Original Message-----
From: Mark C. Stephens [mailto:ma...@non-stop.com.au]
Sent: Sunday, 12 February 2012 4:32 PM
To: David J Taylor; questions@lists.ntp.org
Subject: Re: [ntp:questions] Come back PPS I miss you!
Apologies, Sometimes the threads get a little jumbled my end.
What's a good email client with quoting etc, I am using outlook 2010 at the
moment...
>> I didn't make any!
> However, a clean config is a happy config ;)
>
> I dug out a really old Rockwell Jupiter rx and got it working. I will
> see if I can get the rockwell refclock and PPS happening until my sure
> arrives.
>
> I am also going to pull the HP antenna down, and look at replacing the
> module <grin> is anyone interested in photos of the guts?
>
>
> Many thanks,
> Mark
> > Let's know what happens with the Rockwell Jupiter - I don't know that box.
I fired it up, ah ntpd v4.2.7p253 doesn't seem to recognise refclock 31 anymore
which got a giggle out of me :)
I added the usual server 127.127.31.1 property into the config file but it
never shows up on the list of peers.
So I have tried pps (driver 22)
One thing I noticed, no matter which PPS source I try, (acutime gold, rockwel,
HP GPS) they always get marked false tickers!
I have removed the min/max poll tokens from the property and I will now leave
it running to see if it pulls in.
I did have to fudge time1 0.0480 to get offset down..
C:\Documents and Settings\Administrator>ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
xPPS(1) .PPS. 0 l 5 64 77 0.000 1.646 3.243
+ntp .GPS. 1 s 33 64 77 0.045 -8.206 2.712
*ntp.melbourne. .ATOM. 1 u 50 64 67 40.217 -0.017 2.216
-ntp.hobart. 223.252.32.9 2 u 64 64 67 49.914 -4.417 10.535
+ntp.brisbane. .ATOM. 1 u 55 64 67 31.316 0.897 1.929
as soon as I put flag 3 1 in the fudge I always get: refclock_params:
time_pps_kcbind: Unknown error: 45
According to a reply to an earlier post that is because it is not implemented
in NT. Oops.
Other than that, have a great Sunday!
Mark
_______________________________________________
questions mailing list
questions@lists.ntp.org
http://lists.ntp.org/listinfo/questions
