Apologies, Sometimes the threads get a little jumbled my end. What's a good email client with quoting etc, I am using outlook 2010 at the moment...
>> I didn't make any! > However, a clean config is a happy config ;) > > I dug out a really old Rockwell Jupiter rx and got it working. I will > see if I can get the rockwell refclock and PPS happening until my sure > arrives. > > I am also going to pull the HP antenna down, and look at replacing the > module <grin> is anyone interested in photos of the guts? > > > Many thanks, > Mark > > Let's know what happens with the Rockwell Jupiter - I don't know that box. I fired it up, ah ntpd v4.2.7p253 doesn't seem to recognise refclock 31 anymore which got a giggle out of me :) I added the usual server 127.127.31.1 property into the config file but it never shows up on the list of peers. So I have tried pps (driver 22) One thing I noticed, no matter which PPS source I try, (acutime gold, rockwel, HP GPS) they always get marked false tickers! I have removed the min/max poll tokens from the property and I will now leave it running to see if it pulls in. I did have to fudge time1 0.0480 to get offset down.. C:\Documents and Settings\Administrator>ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== xPPS(1) .PPS. 0 l 5 64 77 0.000 1.646 3.243 +ntp .GPS. 1 s 33 64 77 0.045 -8.206 2.712 *ntp.melbourne. .ATOM. 1 u 50 64 67 40.217 -0.017 2.216 -ntp.hobart. 223.252.32.9 2 u 64 64 67 49.914 -4.417 10.535 +ntp.brisbane. .ATOM. 1 u 55 64 67 31.316 0.897 1.929 as soon as I put flag 3 1 in the fudge I always get: refclock_params: time_pps_kcbind: Unknown error: 45 According to a reply to an earlier post that is because it is not implemented in NT. Oops. Other than that, have a great Sunday! Mark _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions