Hello Arne,
I have just checked out recording from multiple simultaneous sources in QWS
and it works.
I even recorded a sysex.
I recall someone suggested getting a MIDI monitor program to check what your
keyboard is actually sending. Did you manage to do this? What were the
results?
Hope this helps.
James.
----- Original Message -----
From: "Arne" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Friday, July 08, 2011 8:15 PM
Subject: Re: QWS List Recording incoming SysEx Messages
Hello all,
thanks for your suggestions, but I could not solve the problem.
QWS cannot record multiple channels or ports at once, maybe that is the
reson. The patch in question is a layered detuned organ, so on Channel1 I
have one organ left and on Channel2 the other one right, both are detuned.
The patch information from MIDI bulk dump and from panel settings does not
have any effect on the settings, but the patch changing buttons can set
the layer-organ patch. This is only possible in live recording, and it is
not possible to change parameters afterwards. What is more, and I cannot
find out any details about it, there are 2 MIDI-out ports for my P-250.
What I will do is to ask someone to read out the MIDI settings of the
P-250 to me in case there is some wrong setting though I set everything to
default and sending/receiving of all data should be possible.
What can I do to make QWS record from multiple MIDI-channels at once, even
if the track is already recorded and should get another set of layer?
In fact, I just want to play my P-250 with some patch changes, so I want
to record both what I play and the special settings of layers and voices -
and of course after all, I'm still most impatient to do that :).
Best regards,
Arne
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-archive.com/[email protected]
