Hello Arne, Are you sure you're trying to record multiple channels at once in the right way? What i always do and what works for me is, i add a midi track on channel 0 and record all the midi data. I just tried it with a built-in song on my dgx-205. After saving the recording, i used channel split, et voilà, i got every single channel split out on a track. That way, you can easily reassign the program and bank number of the organs you use, pan the first channel to the left and the second channel to the right. -- Regards, Leonard de Ruijter Playing in the dark
Saturday, July 9, 2011, 2:56:10 AM, you wrote: > Hello Arne, > I have just checked out recording from multiple simultaneous sources in QWS > and it works. > I even recorded a sysex. > I recall someone suggested getting a MIDI monitor program to check what your > keyboard is actually sending. Did you manage to do this? What were the > results? > Hope this helps. > James. > ----- Original Message ----- > From: "Arne" <[email protected]> > To: "QWS list" <[email protected]> > Sent: Friday, July 08, 2011 8:15 PM > Subject: Re: QWS List Recording incoming SysEx Messages >> Hello all, >> >> thanks for your suggestions, but I could not solve the problem. >> >> QWS cannot record multiple channels or ports at once, maybe that is the >> reson. The patch in question is a layered detuned organ, so on Channel1 I >> have one organ left and on Channel2 the other one right, both are detuned. >> The patch information from MIDI bulk dump and from panel settings does not >> have any effect on the settings, but the patch changing buttons can set >> the layer-organ patch. This is only possible in live recording, and it is >> not possible to change parameters afterwards. What is more, and I cannot >> find out any details about it, there are 2 MIDI-out ports for my P-250. >> What I will do is to ask someone to read out the MIDI settings of the >> P-250 to me in case there is some wrong setting though I set everything to >> default and sending/receiving of all data should be possible. >> >> What can I do to make QWS record from multiple MIDI-channels at once, even >> if the track is already recorded and should get another set of layer? >> >> In fact, I just want to play my P-250 with some patch changes, so I want >> to record both what I play and the special settings of layers and voices - >> and of course after all, I'm still most impatient to do that :). >> >> Best regards, >> Arne >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see >> http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com > for archived list posts, see > http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
