MIDI code doesn't carry audio, so you need to route the output from the keyboard into your computer. If you're not looking for the best fidelity you can use some sort of cable to route your keyboard audio output to the line in on your computer. (this assumes your computer has a line in input) Your best bet is probably to go from the outputs of the keyboard to the computer in, so that would require a dual quarter phone mono to miniphone stereo cable. If you decide to go from your headphone jack instead you'll want to get a stereo miniphone to stereo miniphone or quarter phone cable, depending on which sized jack your keyboard has.
Sent from my HAL 9000 in transit to Jupiter -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hall Sent: Tuesday, November 17, 2020 12:36 PM To: QWS list <[email protected]> Subject: QWS List Hello I have a problem with QWS. I will try to explaine. i have a USB cable hooked up to my Yamaha keyboard and it goes to my computer at the other end. But when I record a track or search for instruments to record with, I can not hear from my computer speakers and I have to hear it from my ear phone jack on my keyboard and the same when I hear the recording back I still have to hear the sound from my keyboard with head phones. How do I correct the problem so that when I record or hear my instruments from my computer speakers. I hope I have explained this right to you and I would really appreciate the help please thanks. To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
