What width is the fender? Ben's cycle sells Berthoud fender stays/. You could buy one attach it to the front of the fender and use the eyelets on the top f the front drop out to secure it. I did that with my VO venders and it works great.
On Tuesday, May 10, 2016 at 1:00:42 PM UTC-4, Kevin Lindsey wrote: > > I have my Hunq pretty nearly dialed in running perfectly. The only sore > spot - and it's not much of one - is that the front SKS Longboard fender > rattles. I've tried tightening it up, inserting a leather washer in the > hopes that it might dampen the vibrations, etc., and nothing really helps. > The problem seems to be that the distance from the fork attachment point to > the front tip of the fender is simply too long; any small vibration in the > fork (and there are lots of 'em) produces much greater vibrations at the > end of the fender, causing the front to rattle constantly. Has anyone > tried trimming an SKS? I'm thinking of lopping off about four inches up > front, but I'm also afraid that loss of that much fender would leave me > open to front tire spray. > Any thoughts would be appreciated. > Kevin > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
