Novarra steel cages from REI also have the long tabs needed with VO strap clamps (TA clone). However, my VO straps rusted after 2 years, and I went to King Cage stud-welded hose clamps on two bikes.
On Sunday, July 23, 2017 at 9:26:08 PM UTC-5, Steve Palincsar wrote: > > > > On 07/23/2017 10:14 PM, 'Mark in Beacon' via RBW Owners Bunch wrote: > > ... > > Are those the VO cage mounts? If so, what are the cages? > > > Zefal Retro cages (the only ones I found that still had the long tabs for > clamp-on mounting) and NOS TA alloy clamps. Seems the new ones you find > only fit OS tubing, which is curious because every OS bike I've ever looked > at already had brazed on water bottle cage mounts. You can get the TA > clamps two ways on ebay: no packaging, no screws, ten bucks enough for one > cage; or, in the original paper envelope with screws, a hundred bucks. > Those are some expensive paper envelopes! > > > > > On Sunday, July 23, 2017 at 5:27:56 PM UTC-4, Steve Palincsar wrote: >> >> >> >> On 07/23/2017 04:22 PM, Lesli Larson wrote: >> >> Patrick- >> >> As always - thanks for your wisdom. I'm definitely looking for functional >> vintage over spendy pretty bits. >> >> The bike will be for serious rando so durability is an issue. I just >> don't like how most new/tech parts look so I'm always erring on side of >> shopping from the past where I can secure something that will look nice and >> still perform a job. >> >> I'm very intersted in Shimanon derailleurs that you mention. I'm just not >> sure which vintage to target. >> >> >> It's hard to go wrong with any of the Deore XT / XTR Shimano MTBs of the >> 8 or 9 speed eras, except for "Rapid Rise". They all work wonderfully. >> And they index really well, too. Hard for me to accept that they're >> "vintage" technology and I don't consider them so. >> >> Friction shifting Hyperglide is all very well and good, and except for >> the lack of auditory feedback and a relentless desire to ghost shift built >> into its basic nature - in many ways better than friction shifting ever was >> back in the 1970s - but for a serious randonneur it's hard for me to see >> the point. Indexing just plain works better -- at least setups with bar >> end shifters and 8 or 9 speed wide range cassettes -- and you don't have to >> fuss over it or concentrate very hard on it to make it work well. >> >> It's one thing to set up a bike for Eroica-esque historical re-enactment, >> it's a whole different thing to set a bike up for randonneuring. I'm sure >> nobody would suggest "vintage" bottle generators and Jos incandescent >> lights for real honest to god brevets; as far as I'm concerned it's the >> same for drivetrains. >> >> Here's my latest (and also my oldest). The frame happens to be from >> 1963. The drive train is as contemporary-functional as it gets: XTR M900 >> crank & rear derailleur, circa 2002 9 speed XT front derailleur (although >> just about anything including the Campagnolo Nuovo Record I took off my >> Paramount back in 1975 would probably work just as well), NOS 8 speed >> Shimano bar end shifters and a customized 12-32 8 speed Sunrace cassette I >> turned into a 13-32. The range and spacing suit this frame very well, >> better I think than a 9 speed of the same range would do. >> >> >> >> The front wheel came off my VO Randonneur when thanks to Bosch's >> settlement on the VW Diesel Emissions Scandal I upgraded the front wheel to >> the lastest Son Delux Widebody, and the brakes are Mafac Racers Igor worked >> over and made as new. The brake levers are Dia Compe aero levers I got >> somewhere and didn't even remember I had, probably came on my Alex Moulton >> AM. I've got the parts but haven't finished the lighting yet - still >> recovering from the epic struggle of putting fenders on this bike. >> >> >> I'm current running friction on my bike with a TA crank and XTR rear. Not >> sure about the front derailleur. >> >> This bike has a compact double with a wide cluster in the back - >> requiring medium/long cage rd. >> >> I use the Tektro levers with the quick release button. I'd like to buy >> vintage aero levers if i can find one with the equivalent reach. >> >> I'm also looking for a lightweight handlebar that works for smaller >> hands. I use an on one midge bars which I like because of the short reach >> and wide top part. Most of the Nitto offerings are just too large/wide. I >> need something with a shallow drop. >> >> Not sure if anyone is making lightweight classic looking parts (ala >> Nitto) for smaller/shorter cyclists (and women). >> >> >> On Wednesday, July 19, 2017 at 3:46:39 PM UTC-7, Patrick Moore wrote: >>> >>> Leslie: It all depends what you mean by "vintage." Some "vintage" bits >>> are exorbitantly expensive -- Dura Ace 7410 brake lever hoods. Others are >>> still very reasonable -- Shimano 600 levers. 9 speed LX derailleurs IME >>> shift wonderfully; are those old enough to be "vintage"? >>> >>> 10 speed? 9? 8? 7? Fixed? >>> >>> And what sort of stuff. Racer? Mountain bike? Just ride? >>> >>> You can find on this list, on other lists, and on eBay, enough decent >>> non-current drivetrain, wheel, and other bits to build up a very nicely >>> working bike for far, far less than you'd pay for current, mid-level >>> Shimano bits. In fact, if there is a good bike shop near you, you may well >>> find bins and piles of abandoned 8 and 9 speed bits that work perfectly >>> well and that you can buy for pennies on the dollar. I know that I can do >>> this at 2 bike shops within 8 miles of where I live. >>> >>> My favorites, discounting my "style" affectation for 8-speed era Dura >>> Ace: old 8 speed XT derailleurs, cranks, and hubs and, even older, pre-XT >>> "Deore" 7 speed stuff, which may well have been the same stuff as the 8 >>> speed XT, just with different name and slightly different appearance. >>> >>> FWIW, I'm a man (I deprecate using "male" and "female" instead of "man" >>> and "woman", and I hate using "gender" instead of the proper word, "sex" -- >>> nouns have gender, people have sexes, though only 1 each), but I have >>> small, elegant, but bigger than Trumps hands, and I really like the old >>> Shimano aero levers -- easy to reach, and powerful in the pull. I've not >>> used any Campy levers except the old Record non-aeros, and the Shimano 600 >>> and forward aeros are far easier to use, IME. >>> >>> The beginning of a list: >>> >>> Hubs: 8 speed XT or 7 speed Deore or 8 or 9 speed LX >>> Derailleurs: ditto >>> Brakes: Mafac centerpulls are fine, as long as you don't use Mafac >>> levers. Shimano aero levers, it doesn't matter what vintage. Do use >>> Koolstop salmon pads, though. >>> Bar end shifters: the Silvers are wonderful, but fragile IME -- I've >>> broken 3. I like the old SunTour Power Ratchets. I shift 10 using mine, but >>> perhaps 8 may be easier. >>> Cranks: 3 of my 4 bikes have the old Pro 5 Vis; the 4th, for dirt roads, >>> has an old Ritchey Logic. Either of these, or the same 8 speed XT or 7 >>> speed Deore. If you can deal with 52/38 rings (I did; I just started my >>> cassette with a Miche 16 t outer cog), the Dura Ace 7410 crank is the most >>> beautiful crank ever made, over and out, amen. It takes a 103 mm bb >>> spindle, though. >>> >>> I build my own cassettes from cogs scavenged from bike shops; where I >>> need a special outer, I buy Miche. My 10 speed "road bike for dirt" has a >>> cobbled 14-15-16-17-18-19-20-22-24-28 driven by a 42/28, with Power >>> Ratchets pulling a 7410 rear derailleur. A modern, Nashbar "Microshift" rd >>> would work better, but would't look as nice. >>> >>> >>> On Wed, Jul 19, 2017 at 3:47 PM, Lesli Larson <lesli....@gmail.com> >>> wrote: >>> >>>> It's been awhile since I sourced parts for a new bike. I haven't done >>>> this since I ordered my custom Riv ages ago. >>>> >>>> Use: randonneuring >>>> >>>> Question: what's the current wisdom regarding classic long cage >>>> derailleurs, front derailleurs, rear hubs (freewheel or cassette), >>>> seatposts and shifts? >>>> >>>> Have things gotten crazy expensive or is vintage still a viable >>>> alternative to new stuff. >>>> >>>> I'm sorry I missed out on the Riv Phil hub (what I have on my older >>>> road bike). >>>> >>>> I already have Mafac racers, a TA crank, and a set of Campy brake >>>> levers in hand. >>>> >>>> I'm a female with smallish hands and shortish stature. I'm going to set >>>> the bike up as a compact double with either bar-ends or downtube shifters. >>>> >>>> Wondering whether folks recommend in the way of classic, duable, >>>> stylish, lightweight parts? New or old. >>>> >>>> >>>> Let me know if you have anything for sale that might match my shopping >>>> list! >>>> >>>> Regards, >>>> >>>> Lesli Larson >>>> Eugene, OR >>>> >>>> >> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com <javascript:>. > To post to this group, send email to rbw-owne...@googlegroups.com > <javascript:>. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
