Whoops, that's 4 *centimeters* ... On Mon, Dec 12, 2022 at 2:13 PM Patrick Moore <bertin...@gmail.com> wrote:
> I agree that rules of thumb are only starting points. The heel-on-pedal at > max leg extension puts my saddle a good 3 cm too low as I like a lot of leg > extension and tend to pedal toe-down. But it's a good starting point. > > And get your saddle set back to where it is comfortable before doing > anything else; IMO and IME, saddle height and setback are the 2 primary > adjustments around which all others are determined. > > But heck, if you've been comfortable with your previous "4-inches-too-low" > and slammed back saddle -- no hip-rockin', no aching quads, no strained > whatever it is along the inside of the thigh, you have been doing it right. > > But I disagree that standover is a negligible part of fit; try an > emergency dismount on a steep slope facing uphill. > > On Mon, Dec 12, 2022 at 10:49 AM Jay Lonner <jay.lon...@gmail.com> wrote: > >> I just took delivery of a new (non-Riv) bike and am dialing in the fit. >> I’m a little worried that the frame is too big for me, since I only have >> maybe 2” standover, which seems tight for a gravel bike. >> >> So I went out and measured the saddle height on my Hunq (which is a size >> 62). It came in at about 75cm. This gives me a solid fistful of seatpost. >> Then I remeasured my PBH, which is 93-94 cm depending on hard I pull. For >> reference, here’s the relevant page from HQ: >> >> https://www.rivbike.com/pages/pubic-bone-height-how-to-measure-your-pbh >> >> This suggests that based on my PBH my saddle height should be closer to >> 83 cm – an 8cm discrepancy. Before riding in this morning I raised my >> saddle height to 79 cm, basically splitting the difference. It felt weird, >> which of course it would after so many years at 75cm. But I made it in and >> my feet were in full contact with the pedals without any tippytoe >> maneuvers. So I guess I’ve been doing it wrong this whole time? Kind of >> embarrassing. Even so, according to the Riv method my saddle height is >> still ~4cm lower than my PBH would suggest. >> >> So I guess I’m wondering about alternative ways of determining saddle >> height somewhat objectively, and/or whether I should now be looking at >> other variables such as a fore-aft saddle positioning, saddle angle, and >> even saddle type (currently a B68, slammed back as far as it can go on a >> S83, with the nose pitched up ~10 degrees or so). Other relevant factors >> might be crank arm length (175mm), pedal height (Pedaling Innovations >> platform pedals), and shoes (Chuck Taylors, typically). Looking for the >> optimum balance of comfort, efficiency, and protecting my perineum. >> >> Jay Lonner >> Bellingham, WA >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bunch+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/cf9d0b0a-c497-4181-9c30-afdac0d6f54bn%40googlegroups.com >> <https://groups.google.com/d/msgid/rbw-owners-bunch/cf9d0b0a-c497-4181-9c30-afdac0d6f54bn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > > > -- > > ----------------------------------------------------------------------- > Patrick Moore > Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum > > -- ----------------------------------------------------------------------- Patrick Moore Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgvOQg1M3Q_1QKc6GXFDrjEQSbkE9qjeAqV541tffLRogw%40mail.gmail.com.
