I find a more slack seat tube I run my saddle a bit lower than a steeper counterpart.
Ride whatever is comfortable. Don't worry too much about stand over. French fit looks great. On Tuesday, December 13, 2022 at 5:59:19 AM UTC-8 rmro...@gmail.com wrote: > Jay, I noticed your mention of the Pedaling Innovations Catalyst pedal. If > you are using a mid-foot position on your pedals ( I do) you may need to > adjust your saddle down 2-3 cm. I discovered this on my own then confirmed > it with Pedaling Innovations. For this and other reasons I do not favor the > PBH method of determining saddle height. It’s more a guideline than a rule. > I have used the knee slightly bent at bottom of stroke for 50 years without > injury or incident. > > Sent from my iPhone > > On Dec 12, 2022, at 12:49 PM, Jay Lonner <jay.l...@gmail.com> wrote: > > I just took delivery of a new (non-Riv) bike and am dialing in the fit. > I’m a little worried that the frame is too big for me, since I only have > maybe 2” standover, which seems tight for a gravel bike. > > > So I went out and measured the saddle height on my Hunq (which is a size > 62). It came in at about 75cm. This gives me a solid fistful of seatpost. > Then I remeasured my PBH, which is 93-94 cm depending on hard I pull. For > reference, here’s the relevant page from HQ: > > https://www.rivbike.com/pages/pubic-bone-height-how-to-measure-your-pbh > > This suggests that based on my PBH my saddle height should be closer to > 83 cm – an 8cm discrepancy. Before riding in this morning I raised my > saddle height to 79 cm, basically splitting the difference. It felt weird, > which of course it would after so many years at 75cm. But I made it in and > my feet were in full contact with the pedals without any tippytoe > maneuvers. So I guess I’ve been doing it wrong this whole time? Kind of > embarrassing. Even so, according to the Riv method my saddle height is > still ~4cm lower than my PBH would suggest. > > So I guess I’m wondering about alternative ways of determining saddle > height somewhat objectively, and/or whether I should now be looking at > other variables such as a fore-aft saddle positioning, saddle angle, and > even saddle type (currently a B68, slammed back as far as it can go on a > S83, with the nose pitched up ~10 degrees or so). Other relevant factors > might be crank arm length (175mm), pedal height (Pedaling Innovations > platform pedals), and shoes (Chuck Taylors, typically). Looking for the > optimum balance of comfort, efficiency, and protecting my perineum. > > Jay Lonner > Bellingham, WA > > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/cf9d0b0a-c497-4181-9c30-afdac0d6f54bn%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/cf9d0b0a-c497-4181-9c30-afdac0d6f54bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/62f70b0e-7ad8-4bb9-9c73-13d9206e746fn%40googlegroups.com.
