I like these solutions Nick, Kim and Andy. 

Absent a pump peg mount I do think that using the QR skewer is the best, so 
elegant and minimal. I read about that on iBOB and it really got me. Then I 
forgot about it. I'll have to see if I can make that work. 

Wes: It's not necessarily better! It's just an idea I executed to see if it 
would work. I definitely prefer the brazed-on pump peg. That said, there 
might be some interference between the front derailer cable and the pump 
when mounted behind the seat tube. I actually can't tell. Haven't had any 
shifting issues but I can't get a good line of sight and have been too lazy 
to crawl under the bike or flip it over to truly investigate. 

On Wednesday, January 18, 2023 at 2:39:54 AM UTC-5 Keith P. wrote:

> Ingenious solutions all around.
> Full marks!
> k.
>
> On Tue, Jan 17, 2023 at 9:48 PM Wesley <brooks...@gmail.com> wrote:
>
>> This is cool, Eric - but how is it better than using the pump peg that 
>> was so thoughtfully brazed onto your frame?
>> -Wes
>>
>> On Tuesday, January 17, 2023 at 7:05:38 PM UTC-8 eric...@gmail.com wrote:
>>
>>> I read Will's post about how to make your own pump peg on the Blug a 
>>> long while back: 
>>>
>>> https://rivbike.tumblr.com/post/185595499869/how-to-make-your-own-pump-pegs
>>>
>>> You take a p-clamp, some spacers and modify a Nitto strut and you've got 
>>> a pump peg somewhere you might not have had one before. Will likes to put 
>>> his in the rear triangle and you'll notice them mounted this way on a lot 
>>> of his bikes.  
>>>
>>> [image: tumblr_inline_pt3zzjpbXk1qdvnvk_500.jpg]
>>> [image: tumblr_inline_pt401jwzC21qdvnvk_500.jpg]
>>>
>>> This is great, I love it, cool hack! But I've always wanted for a 
>>> version that doesn't require tracking down and destroying a Nitto strut. 
>>> Riv HQ is probably awash in Nitto struts and they have em poking out of the 
>>> coffee cans on everyone's desk all over the place. But not so for me, Nitto 
>>> struts are precious few in my shed. 
>>>
>>> I think I came up with the right shape and this weekend I picked up an 
>>> electrical ring terminal in the 10-12 size, yellow sleeve. 
>>>
>>> [image: Screen Shot 2023-01-17 at 9.56.39 PM.png][image: Screen Shot 
>>> 2023-01-17 at 9.56.44 PM.png]
>>>
>>> Holding the ring end with one pair of pliers you can easily remove the 
>>> yellow sleeve with a second pair of pliers. A pack of 15 is $4.50. If your 
>>> local hardware store has a bulk/loose hardware section you can get one for 
>>> around 55ยข (at least I did). 
>>>
>>> Paired with a 3/8" insulated cable clamp (2 for $2.20), a few serrated 
>>> brake washers, an M5 bolt and a nylock nut I had a fashioned a pump peg. 
>>> Didn't have to cut or shape any metal or destroy any high-end Japanese rack 
>>> struts. 
>>>
>>> [image: IMG_4875.JPG]
>>>
>>> [image: IMG_4874.JPG]
>>>
>>> I have yet to SUPER TEST this out but wanted to share all the same. 
>>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bun...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/ca8830f0-27bd-4cff-a41c-7157311dd58an%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/rbw-owners-bunch/ca8830f0-27bd-4cff-a41c-7157311dd58an%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/734f38db-d298-466e-9e20-6a3400ec6e02n%40googlegroups.com.

Reply via email to