Re: [RBW] Re: Hexlox Skewer Nut Failures

[Leah Peterson]

Interesting, Armand! It’s the mechanics at the shop who do the work and complain that the threads strip.  At least two of them have had to call me and tell me the threads were stripped, so this is not limited to only one mechanic. And the master mechanic (who really does deserve the title) says that my Riv forks require a good bite into the steel nut to keep things locked down. Something about lots of vibration in the fork.  I took the bike in because the wheel wasn’t spinning right and it was the axle causing the issue. I would love the issue to be our fault, however, because I love the design of the Hexlox systems and the key is so minimal.  I hope yours continue to work for you and too bad we don’t live in the same zip code because I would love to have you look at my setup and see where/if I’ve gone wrong. Sigh. L On Jun 13, 2026, at 1:11 AM, Armand Kizirian <kizirianarm...@gmail.com> wrote: I have two hexlox sets on two different bikes for years and have removed the wheels dozens of times without issue. I do apply some light grease on the axle threads, and reapply very rarely. Perhaps you are torquing them down too much?  On Friday, June 12, 2026 at 12:16:24 PM UTC-7 Jamie D. wrote: I put a rare earth magnet over the allen bolt head on the skewer to create confusion and deterrence. Not seeing an allen head is strange and I imagine a thief doesn't want to stand around staring at a potential wheel they're considering stealing trying to figure out what's going on. The magnet is strong and removing it is just fiddly enough that unless you know what's going ahead of time it would take you longer than expected to remove it. Allen keys are also attracted to the magnet so unless you fully remove the magnet from the skewer it makes it more difficult to get an allen key engaged. On Wednesday, June 10, 2026 at 8:46:45 PM UTC-4 Bicycle Belle Ding Ding! wrote: I have 4 that I got on sale and so they all have different keys… On Jun 10, 2026, at 8:40 PM, Al in SF <spamhi...@gmail.com> wrote:  On Wednesday, June 10, 2026 at 7:38:02 AM UTC-7 Bicycle Belle Ding Ding! wrote: I do have Pitlocks I bought from the marvelous Peter White that are just sitting here. I bought them when the aluminum Hexlox failed, thinking I’d have to give up those skewers. But I got those steel nuts and so these Pitlocks have sat in their packages.  Before I tear apart my bikes again and have to carry 4 different keys around with the Pitlock system, does anyone have a better, slicker solution? Wait, how many Pitlock sets do you have? If you only have one, you can buy new sets that are keyed to your existing key. It's just a tiny little nut that is different. Al in SF -- You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/j8WQEoUi51o/unsubscribe. To unsubscribe from this group and all its topics, send an email to rbw-owners-bun...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/0f526e1f-73c3-4758-a5c1-f87623b122e1n%40googlegroups.com. -- You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/j8WQEoUi51o/unsubscribe. To unsubscribe from this group and all its topics, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/8b2656c0-43c8-4e5a-b601-57a7befbc6den%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/EFC65C3F-6CCA-44C7-AA09-9604292F8AD0%40gmail.com.