OK, thanks. On Feb 1, 11:23 am, Marty <mgie...@mac.com> wrote: > Hey Ron & Jon, could you post some pics of your rigs on the All > Rounder Flickr group? > > http://www.flickr.com/groups/allrounder/ > > Marty (keepin' my eyes peeled for a 61cm AR) > > On Feb 1, 12:38 pm, RonLau <ron...@ronlau.com> wrote: > > > I have done it before, > > >http://cyclofiend.com/cc/2005/cc006-ronlau0505.html > > > You have to use Tektro Oryx which has enough adjustment for it. If > > you do like this better, you may want to invest on a set of > > Paul MotoBMX. > > > Some may complain about the higher bottom bracket height, but I am use > > to higher BB height in general, so I don't really care. > > > In case you are those who believe lower BB height, you may want to > > read this. > > >http://davesbikeblog.squarespace.com/blog/2007/2/21/bottom-bracket-he... > > > Ron > > > On Feb 1, 8:25 am, Lee <leec...@gmail.com> wrote: > > > > Oops, I just realized this bike may be going from 559 to 584. Moving > > > along... > > > > Lee > > > > On Feb 1, 8:12 am, Lee <leec...@gmail.com> wrote: > > > > > In case those aren't long enough, I believe the Shimano BR R-550 > > > > cantis have a tad more reach. > > > > > Good luck! > > > > Lee Chae > > > > San Francisco, CA > > > > > On Feb 1, 6:48 am, Tim McNamara <tim...@bitstream.net> wrote: > > > > > > According to the text about Ron's bike, he used Tektro Oryx brakes on > > > > > his. > > > > > > On Feb 1, 2011, at 8:16 AM, Roy Yates wrote: > > > > > > > My experience is roughly the same as Tim's. While the chainstay and > > > > > > fork clearance looks to be more than enough for wide 650B tires, my > > > > > > stumbling block has been the canti brakes. My preliminary > > > > > > measurements > > > > > > indicated that none of the canti's I own has enough vertical > > > > > > adjustment to reach the 650B rim. > > > > > > > Can anybody recommend a canti brake that has enough vertical > > > > > > adjustment so that it can reach the 650B rim using canti posts > > > > > > designed for 26 inch? > > > > > > > At the moment, I have Avid Shortys on the bike which I don't love, > > > > > > so > > > > > > I'd be happy to switch to a canti that is 650B compatible > > > > > > > Thanks, > > > > > > ...Roy > > > > > > BTW My All-Rounder is definitely 1-2mi/hr slower than my other > > > > > > roadbikes, (even if I run 1.25in tires) but sometimes that's what a > > > > > > ride calls for. > > > > > > > On Feb 1, 1:08 am, Tim McNamara <tim...@bitstream.net> wrote: > > > > > >> The older A/Rs were all built on 26" wheels, so changing to 650B > > > > > >> would raise the BB by 12.5 mm +/- the difference in tire cross > > > > > >> section. The only person to convert an A/R to 650B that I know of > > > > > >> was Ron Lau. > > > > > > >>http://www.cyclofiend.com/cc/2005/cc006-ronlau0505.html > > > > > > >>http://www.freewebs.com/650b/ronsallrounder.htm > > > > > > >> He was very bullish about it and I corresponded with him about the > > > > > >> possibility of trying it with my A/R, although I never got around > > > > > >> to trying it. Ron said he had trouble keeping the 26" version > > > > > >> over 12-15 mph but with 650B wheels it was much faster. With 26 x > > > > > >> 1.25 Paselas I find my A/R is as fast as any of my other bikes and > > > > > >> I really like how it handles, so I never made the switch. > > > > > > >> On Jan 31, 2011, at 11:12 PM, cyclotourist wrote: > > > > > > >>> Hi Jon, the consensus I've heard is that Rivendell bottom > > > > > >>> brackets are pretty low to begin with, and dropping them further > > > > > >>> with 650b wheels can lead to a lot of pedal strikes. That said, > > > > > >>> if you're going to use Hetres and shorter the cranks to 165, > > > > > >>> shouldn't be tooooo much of a problem. Don't A-Rs all have > > > > > >>> cantis though? That's your bigger headache. > > > > > > >>> Have fun! > > > > > > >>> On Mon, Jan 31, 2011 at 8:25 AM, Jon Flaxman <jflax...@uaex.edu> > > > > > >>> wrote: > > > > > >>> Just scored my third Rivendell - this one is an early All Rounder > > > > > >>> with > > > > > >>> S&S couplers. > > > > > > >>> I'm thinking about converting it to a 650b. Has anyone done this > > > > > >>> before? What were the results? > > > > > > >>> Are there any pre-built 650b wheelsets for Clydes? > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "RBW Owners Bunch" group. > > > > > > To post to this group, send email to > > > > > > rbw-owners-bunch@googlegroups.com. > > > > > > To unsubscribe from this group, send email to > > > > > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > > > > > For more options, visit this group > > > > > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. > >
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
