Helpful hint: If you really want two pairs, you might want to try and request a price match of Jenson's price with Tree Fort bikes, as they are really good about price matching (even when the competitor doesn't have the item in stock) and offer free shipping over $125. So maybe throw in a tube to get it over-- and they have them in stock.
On Mar 6, 9:51 pm, William <tapebu...@gmail.com> wrote: > Whoa! That's a killer price ($56 for 8-speed Shimano barcons). > Except they don't have them. Presumably they will someday soon. They > expect them on Mar 10. Funny they charge $100 for the 9-speeds, > though. At $56 I might even stock up on a pair or two. Two of the > three bikes I have running Shimanos are 8-speed. > > On Mar 6, 6:42 pm, Mike S <mikeshalj...@gmail.com> wrote: > > > Here is the price difference, @ Jenson USA:http://tinyurl.com/4b38t4p > > > I only use friction shifting with an 11-34 XT cassette and XT shadow > > derailleur. Works beautifully. > > > On Mar 6, 5:39 pm, William <tapebu...@gmail.com> wrote: > > > > I don't know where you get a $35 price difference. Maybe if you find > > > some used ones on ebay you can get Shimanos for under $60, but Riv > > > sells Silvers for $92 and Shimanos for $82 or $92 for 8 speed and 9 > > > speed respectively. I don't think anyone in their right mind would > > > ever claim that Shimano indexed barcon shifters don't work > > > fantastically when you have the right combination of derailer and > > > cassette to go with you shifters. If, like a lot of us, you don't > > > want to be tied to having to match your cassette and derailer to your > > > shifter, then you can go friction. It's a longstanding Rivendell > > > opinion that shifting a bicycle is incredibly simple. Index might be > > > even simpler, but the task was already ridiculously simple to start > > > with. Clip on ties are simpler to put on than neckties that you tie, > > > but I know how to tie a tie, so the benefit is negligible. Friction > > > shifting is incredibly easy, and index is even easier, but I know how > > > to shift in friction so the benefit is negligible. Silvers feel a LOT > > > better in friction mode, I think. Both are fantastic. In my garage > > > at the moment there are 3 bikes with Shimano bar ends, and 3 with > > > Silvers (or Suntour Sprints). They all shift great. If Shimanos > > > really are $35 cheaper to you, and if you like them, then I'd stock > > > up, because indicators tell us they will not be around for long. > > > > On Mar 6, 1:09 pm, Mike S <mikeshalj...@gmail.com> wrote: > > > > > I have Shimano Ultegra bar end shifters on a bike of mine, and in my > > > > opinion they work splendidly. I've never had any mechanical problem > > > > with them in two years, they're made in Japan (I think) and I don't > > > > know of any plasticy vulnerabilities. They are also $35 cheaper than > > > > the Silvers, so I'm wondering why/if people think the Silvers are far > > > > superior? > > > > > I was going to get the SIlvers when I was setting this bike up, but > > > > the price tag was a bit hefty compared to the Shimanos. ANybody got an > > > > argument as to why Silvers are worth it? > > > > > On Mar 6, 2:05 pm, charlie <charles_v...@hotmail.com> wrote: > > > > > > Its okay Grant.......I'd say most of us are sensible enough to realize > > > > > the insignificance and accept the commonly available substitute born > > > > > of Yankee ingenuity. > > > > > > On Mar 6, 10:30 am, grant <grant...@gmail.com> wrote: > > > > > > > Nobody should be horrified, shocked, or even disappointed that we > > > > > > "spec'd a part with fragile plastic." There's more to it than that. > > > > > > We don't get lab results or long-term test results for every part on > > > > > > every component we use. There's a certain amount of faith involved, > > > > > > or > > > > > > else you can't move. In this case, the same sources were used for > > > > > > the > > > > > > Silver washers as were used for the SunTour Sprint washers, and I've > > > > > > had them last 5 years. "Failure" means they crack or a chunk falls > > > > > > out, but they are failsafe----meaning safe when they've failed. We > > > > > > don't use plastic forks (except for eating with sometimes), but a > > > > > > plastic washer now and then....it's not horrid. > > > > > > Two years ago we offered a 3-piece metal and plastic mix of washers > > > > > > you could get at a hardware store. We provided them free for the > > > > > > asking. Beyond that, we told the maker Hey Please Do Better, and > > > > > > before we OK'd the "improved" part, we hung it and an old one out in > > > > > > the sun, zip-tied to a bike rack where it could get sunbaked badly. > > > > > > Then we tried to mash both. The old cracked, the new didn't, and > > > > > > those > > > > > > are the ones we got now. > > > > > > > Grant "this is as defensive as I get, and sorry 'bout it" Petersen > > > > > > > On Mar 5, 2:23 pm, Justin August <justinaug...@gmail.com> wrote: > > > > > > > > Took out the Bleriot with Hetres for a spin and while hanging out > > > > > > > reading a book it fell over and now one of my compression washers > > > > > > > is > > > > > > > cracked. Annoying, can't believe Riv specced a part with fragile > > > > > > > plastic, etc…. > > > > > > > > My question: Do I wait for VO to get more in stock or can I use > > > > > > > something else? Can I use a leather washer instead of a > > > > > > > compression > > > > > > > washer? > > > > > > > > Or am I boned? > > > > > > > > Pics of the Bleriot: (ignore my front derailler cable > > > > > > > fray)http://www.flickr.com/photos/justinaugust/5500751630/in/set-721576245... -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
