Sorry Jay... Missed your post.
>From what I understand we changed this between 75 and 76 because of popping in and out of sell. Ignoring the Temp compensation for Selling allows the inverter to be a bit more predictable. Steve Higgins. Sr Application Engineer. Sub-Saharan Africa Business Dev Mgr. Outback Power Systems. 19009 62nd Ave Ne Arlington Wa 98223 360-618-4313 From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Monday, April 05, 2010 3:17 PM To: RE-wrenches Subject: Re: [RE-wrenches] Fwd: Outback Grid Problems HI Steve, Is there a logic to the change between < 75 and 76> regarding loss of temp comp for Sell RE? thanks, jay peltz power On Apr 5, 2010, at 2:11 PM, Steve Higgins wrote: Sell RE and Refloat are not Temp Compensated, Absorb, Float Voltages and EQ are temp Compensated. Older Grid tie inverters using firmware revision 75 utilized temperature compensated voltage with the Sell RE, but new versions such as 76 and above don't. "2)What is the difference between refloat and rebulk?" For the purpose of the GT units, it's really the same. Just when Refloat, is triggered it's basically going into a Re-bulk mode. Steve Higgins. Sr Application Engineer. Sub-Saharan Africa Business Dev Mgr. Outback Power Systems. 19009 62nd Ave Ne Arlington Wa 98223 360-618-4313 MESSAGE CONFIDENTIALITY NOTICE: This message (including attachments) is covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may also be protected by attorney-client or other privilege. If you believe that it has been sent to you in error, please do not read it. If you are not the intended recipient,you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you.
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org