It is an interesting issue. If you have a peak roof with modules on
the south side only, venting through the north side is wide open.
Possibly the NEC could acknowledge this fact. 

----- Original Message -----
From:
 "RE-wrenches" <re-wrenches@lists.re-wrenches.org>

To:
"RE-wrenches" <re-wrenches@lists.re-wrenches.org>
Cc:

Sent:
Thu, 12 Jul 2018 15:07:18 -0500
Subject:
Re: [RE-wrenches] Solar set backs

I had a student tell me that firefighters are often venting through
the gable side wall as opposed to the roof.  Can anyone confirm or
deny this statement?

Shine On!

Kris Schmid
Legacy Solar, LLC
137 West 1st Avenue
Luck, WI 54853
www.legacysolar.com [1]
715-653-4295
NABCEP Certified PV Installation Professional
Licensed Wisconsin Master Electrician
BSEE

On Tue, Jul 10, 2018 at 6:46 PM, <cwar...@entech-engineering.com [2]>
 wrote:

        NYSERDA out of NY has reasonable amendments to the IBC for setbacks
for access and ventilation. They clarify that the hip roof valley is
18" either side for a total of 36" width.   

        On 2018-07-10 17:38, Wayne Irwin wrote: Calfire code seems to be the
standard being somewhat enforced as the standard nationwide.

 Wayne Irwin,
 President
 License #CVC56695
 State Licensed Solar Contractor
 Pure Energy Solar International Inc.
 wa...@pureenergysolar.com
http://PureEnergySolar.com [3]
http://SolarChargingStation.net [4]
 352 377-6527 Office
 352 336-3299 Fax

 The Sun Is Always Shining!

 The content of this message is Pure Energy Solar Confidential. If you
are not the intended recipient and have received this message in
error, any use or distribution is prohibited. Please notify me
immediately by reply e-mail and delete this message from your computer
system. Thank you.

-------------------------
FROM: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org [5]> on
behalf of Daniel Young <dyo...@dovetailsolar.com [6]>
SENT: Tuesday, July 10, 2018 5:25:01 PM
TO: 'RE-wrenches'
SUBJECT: Re: [RE-wrenches] Solar set backs
  

        Hey Gary, 

          

        Ohio Fire Code does cover this. It's a matter of if the Fire marshal
in you project area wants to waive or alter the requirements. 

          

        http://codes.ohio.gov/oac/1301:7-7-06v1 [7] 

          

        Specifically 605.11.1.2 is for residential buildings. There is some
conflict in terms of Hip roofs in the code there. 605.11.1.2.2 states
a single 3ft path on one edge or another for a hip roof, but
605.11.1.2.4 states that an 18 space is allowed when modules are
mounted on two adjacent roof planes with a hip roof. 

          

        With Regards, 

          

        Daniel Young, 

        NABCEP Certified PV Installation ProfessionalTM: Cert #031508-90 

          

        FROM: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org [8]> ON
BEHALF OF gary easton
SENT: Monday, July 09, 2018 3:39 PM
TO: RE-wrenches <re-wrenches@lists.re-wrenches.org [9]>
SUBJECT: [RE-wrenches] Solar set backs 

           

        Hello Wrenches,  

        What are you all seeing required as setbacks post 2017?  I am having
inspectors vary between wanting a 3' lane at the bottom and sides to
allowing the array down to the gutter, and from requiring between 18"
and 3' at the ridge.      

          

        --   

        Gary Easton
 Appalachian Renewable Power

        Stewart, Ohio 45778
 NABCEP Certified Solar PV                             
                              
 T: 740-277-8498

         www.arp-solar.com [10]

          

"FIRST THEY IGNORE YOU. THEN THEY LAUGH AT YOU. THEN THEY FIGHT YOU.
THEN YOU WIN."

        ~Ghandi 

          

_______________________________________________
 List sponsored by Redwood Alliance

 List Address: RE-wrenches@lists.re-wrenches.org [11]

 Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[12]

 List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[13]

 List rules & etiquette:
www.re-wrenches.org/etiquette.htm [14]

 Check out or update participant bios:
www.members.re-wrenches.org [15]

_______________________________________________
 List sponsored by Redwood Alliance

 List Address: RE-wrenches@lists.re-wrenches.org [16]

 Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[17]

 List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[18]

 List rules & etiquette:
www.re-wrenches.org/etiquette.htm [19]

 Check out or update participant bios:
www.members.re-wrenches.org [20]

 

Links:
------
[1] http://www.legacysolar.com
[2] mailto:cwar...@entech-engineering.com
[3] http://PureEnergySolar.com
[4] http://SolarChargingStation.net
[5] mailto:re-wrenches-boun...@lists.re-wrenches.org
[6] mailto:dyo...@dovetailsolar.com
[7] http://codes.ohio.gov/oac/1301:7-7-06v1
[8] mailto:re-wrenches-boun...@lists.re-wrenches.org
[9] mailto:re-wrenches@lists.re-wrenches.org
[10] http://www.arp-solar.com
[11] mailto:RE-wrenches@lists.re-wrenches.org
[12]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[13]
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[14] http://www.re-wrenches.org/etiquette.htm
[15] http://www.members.re-wrenches.org
[16] mailto:RE-wrenches@lists.re-wrenches.org
[17]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[18]
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
[19] http://www.re-wrenches.org/etiquette.htm
[20] http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to