Hey Chris, Sounds like a failed power supply board Outback part SPARE-215. If the unit is under warranty you should be able to get a replacement through OB tech support.
> Sent from a IPhone, with touch screen keys on the fly. Please excuse > shortcuts and typos. > Roland Shackelford NABCEP CERTIFIED PV INSTALLER President Renewable Energy Services (RES), Inc. Mobile: 808-938-9239 www.renewablenergy.com > On Jun 25, 2020, at 7:35 AM, Chris Schaefer <ch...@solarandwindfx.com> wrote: > > > G'Day All, > > So I started up a system recently with two Radian 8048A's. The master is > connected to port 1 and the slave connected to port 2 with the FlexNet at > port 3. There are no OB charge controllers in the system. When the hub is > polling (led's scrolling) nothing shows up for the slave at port 2. It's like > the slave inverter doesn't exist. So I moved the slave and flexnet down to > port 3 and 4. No change in the polling. I swapped out comm (factory green) > cables. Again no change. Looking at the control board of the slave there is > only one green led on which is located at the upper right-hand side. > Otherwise no led's are on. I have 57v at the buss bar terminals of the > inverter. Of course since there is no polling at the hub there is no way to > view port 2 to view the slave at the Mate. > > Now the only thing that I didn't do was to try and use the manual on/off > switch-jumper to start the slave. But in the past regardless of the inverter > being on or off it would still show up on the hub. This is a new one and I'm > looking for some direction here. > > Thanks, > Christopher- > Chris Schaefer’s > > Tel/Fax 585-229-2083 or Cell 585-748-1870 > 5115 South Hill Road ~ Canandaigua New York 14424 > www.solarandwindfx.com ~ E-mail: ch...@solarandwindfx.com > > > > Thomas Jefferson, the author of our great Constitution, once said, > "democracy" will cease to exist when you take away from those who are willing > to work and give to those who would not." > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
