Ok back to outback defective board in the comms side of the inverter, contact outback and what ever you do do NOT leave your number for a call back as it will never come, call first thing, stay on hold and wait. Jerry
On Thu, Jun 25, 2020, 2:00 PM Chris Schaefer <ch...@solarandwindfx.com> wrote: > Since the Flexnet on port 3 was active and could be seen on the Mate, thus > I moved the slave on port 2 to port 3 and moved the FlexNet from port 3 to > port 4. No change. I did try another OB factory green cable to no avail. > > Christopher > > On Thu, Jun 25, 2020 at 4:25 PM Jerry Shafer <jerrysgarag...@gmail.com> > wrote: > >> Chris >> Did you skip over and plug in to port 3 with the slave, swap the cord, >> Jerry >> >> On Thu, Jun 25, 2020, 12:54 PM Chris Schaefer <ch...@solarandwindfx.com> >> wrote: >> >>> The system is critical to a farm watering operation so I wasn't able to >>> shut it down to try and swap the port 1 inverter with the port 2 inverter. >>> As for changing the power save settings, that is what alerted me to the >>> issue. Under no circumstance can you see a port 2 via the Mate. That's what >>> had me looking at the hub itself and that's when I noticed that the LED on >>> port 2 wasn't lighting up as the hub scrolled/polled by. >>> >>> Christopher >>> >>> On Thu, Jun 25, 2020 at 3:37 PM William Miller <will...@millersolar.com> >>> wrote: >>> >>>> Christopher; >>>> >>>> >>>> >>>> Just spit-balling here: is the secondary inverter asleep (hate the >>>> master/slave terminology…)? Try changing power save settings to make sure >>>> the secondary is awake and see if that changes the situation. Seems >>>> unlikely this will solve the problem, but it may provide some kind of clue. >>>> >>>> >>>> >>>> Also, did you try swapping primary and secondary? Run with secondary >>>> alone as primary? >>>> >>>> >>>> >>>> William Miller >>>> >>>> >>>> >>>> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On >>>> Behalf Of *Chris Schaefer >>>> *Sent:* Thursday, June 25, 2020 10:35 AM >>>> *To:* RE-wrenches >>>> *Subject:* [RE-wrenches] Slave Radian not showing up on Hub10 or @ >>>> Mate3s >>>> >>>> >>>> >>>> G'Day All, >>>> >>>> >>>> >>>> So I started up a system recently with two Radian 8048A's. The master >>>> is connected to port 1 and the slave connected to port 2 with the FlexNet >>>> at port 3. There are no OB charge controllers in the system. When the hub >>>> is polling (led's scrolling) nothing shows up for the slave at port 2. It's >>>> like the slave inverter doesn't exist. So I moved the slave and flexnet >>>> down to port 3 and 4. No change in the polling. I swapped out comm (factory >>>> green) cables. Again no change. Looking at the control board of the slave >>>> there is only one green led on which is located at the upper right-hand >>>> side. Otherwise no led's are on. I have 57v at the buss bar terminals of >>>> the inverter. Of course since there is no polling at the hub there is no >>>> way to view port 2 to view the slave at the Mate. >>>> >>>> >>>> >>>> Now the only thing that I didn't do was to try and use the manual >>>> on/off switch-jumper to start the slave. But in the past regardless of the >>>> inverter being on or off it would still show up on the hub. This is a new >>>> one and I'm looking for some direction here. >>>> >>>> >>>> >>>> Thanks, >>>> >>>> Christopher- >>>> >>>> Chris Schaefer’s >>>> <http://www.solarandwindfx.com> >>>> >>>> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * >>>> *5115 South Hill Road ~ Canandaigua New York >>>> 14424www.solarandwindfx.com <http://www.solarandwindfx.com> ~ E-mail: >>>> **ch...@solarandwindfx.com >>>> <ch...@solarandwindfx.com>* >>>> >>>> Thomas Jefferson, the author of our great Constitution, once said, >>>> "democracy" will cease to exist when you take away from those who are >>>> willing to work and give to those who would not." >>>> _______________________________________________ >>>> List sponsored by Redwood Alliance >>>> >>>> List Address: RE-wrenches@lists.re-wrenches.org >>>> >>>> Change listserver email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> List-Archive: >>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>> >>>> List rules & etiquette: >>>> www.re-wrenches.org/etiquette.htm >>>> >>>> Check out or update participant bios: >>>> www.members.re-wrenches.org >>>> >>>> >>> >>> -- >>> >>> Chris Schaefer’s >>> <http:www.solarandwindfx.com> >>> >>> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * >>> *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com >>> <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com >>> <ch...@solarandwindfx.com>* >>> >>> >>> Thomas Jefferson, the author of our great Constitution, once said, >>> "democracy" will cease to exist when you take away from those who are >>> willing to work and give to those who would not." >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >>> >>> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> > > -- > > Chris Schaefer’s > <http:www.solarandwindfx.com> > > *Tel/Fax 585-229-2083 or Cell 585-748-1870 * > *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com > <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com > <ch...@solarandwindfx.com>* > > > Thomas Jefferson, the author of our great Constitution, once said, > "democracy" will cease to exist when you take away from those who are > willing to work and give to those who would not." > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
