Wrenches You will need the mate celular or some hard line comm. Make sure you have all current firmware in all the devices. Once you set up the mate at the home screen push the port button and get the Mac address, next set up your site on opticsRE and your done, keep all on one log in site and easy peasy. Software is a must dont skip it. Jerry NABCEP PV Inspector
On Mon, Oct 12, 2020, 4:05 PM Howie Michaelson <howie.michael...@gmail.com> wrote: > Hey FOlks, > While Outback had been my goto offgrid system, over the last many years I > have gravitated to the Conext and Sol-Ark systems. However, I have many > legacy Outback VFX systems out there and some could really use remote > communication. Unfortunately, I have stayed far away from Optics RE, as I > haven't been thrilled with the reports of issues the system had. However, > it seems it is the best option for remote oversight, so I am trying to > figure out what is required and what it is capable of. > I've read through the initial documentation and as best I can gather, I > need a Mate 3s and an internet connection - is that all? I assume having a > FlexnetDC in the system is critical as well. I'm also wondering if there > is a way to monitor basic production data from a Midnite Classic through > the Optics system. And is the Optics RE system fairly solid since I'm not > thrilled about putting in systems that need too much fussing or attention > to keep operating once they are set up properly. Finally, are there any > other comparable monitoring equipment that would work for monitoring such > systems? > Thanks, > Howie > > *Howie Michaelson**Sun Catcher* > > *NABCEP Certified Solar PV Installer™* > > *Solar Electric Systems Sales & Service802-272-0004* > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
